From: Bernard Dunn (dunn@xxxxxxxxx)
Date: Sun Feb 18 2001 - 19:19:01 GMT-3
Elton,
With both dialer profiles working, you have a default max-links for each
of 4. That I'd imagine would be your problem.
Try 'debug dialer' to see what's going on.
Regards
Bernard.
On Sun, 18 Feb 2001, Elton Fontaine wrote:
> I had this configuration working when I was only using dialer profile 1 for
> IP. Once I added Dialer profile 2 for IPX neither IP or IPX worked over the
> ISDN circuit.
>
>
> Below is a copy of my configs and debug output.
>
> Does anyone have any ideas?
>
> The reason given for rejecting the call is "Network congestion tone on".
>
> R3
>
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0146710010
> isdn spid2 0146710020
> no cdp enable
> ppp multilink
> !
> interface Dialer1
> ip address 172.168.65.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> ip ospf interface-retry 0
> no ip mroute-cache
> dialer remote-name router5
> dialer idle-timeout 30
> dialer string 4672001
> dialer pool 1
> dialer-group 1
> no peer neighbor-route
> ppp multilink
> !
> interface Dialer2
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name router5ipx
> dialer idle-timeout 30
> dialer string 4672001
> dialer pool 1
> dialer-group 2
> ipx network 35
> no ipx route-cache
> ipx update interval rip 20
> ipx watchdog-spoof
> ipx spx-spoof
> ppp multilink
>
> access-list 901 deny any any 457
> access-list 901 deny any any rip
> access-list 901 deny any any sap
> access-list 901 permit any
> dialer-list 1 protocol ip permit
> dialer-list 2 protocol ipx list 901
>
>
> *********************************************
>
> R5
>
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0146720010
> isdn spid2 0146720020
> no cdp enable
> ppp multilink
> !
> interface Dialer1
> ip address 172.168.65.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> ip ospf interface-retry 0
> ip ospf demand-circuit
> no ip mroute-cache
> dialer remote-name router3
> dialer idle-timeout 30
> dialer string 4671001
> dialer pool 1
> dialer-group 1
> no peer neighbor-route
> ppp multilink
> !
> interface Dialer2
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name router3ipx
> dialer idle-timeout 30
> dialer string 4671001
> dialer pool 1
> dialer-group 2
> ipx network 35
> no ipx route-cache
> ipx update interval rip 20
> ipx watchdog-spoof
> ppp multilink
> !
>
> ************************************************
>
> Debug isdn event / Debug isdn q931 output from r3 (output same on both
> routers
>
> *Mar 1 16:19:25.903: ISDN BR0: Outgoing call id = 0x8010
> *Mar 1 16:19:25.907: ISDN BR0: Event: Call to 4672001 at 64 Kb/s
> *Mar 1 16:19:25.919: ISDN BR0: TX -> SETUP pd = 8 callref = 0x10
> *Mar 1 16:19:25.919: Bearer Capability i = 0x8890
> *Mar 1 16:19:25.923: Channel ID i = 0x83
> *Mar 1 16:19:25.927: Keypad Facility i = '4672001'
> *Mar 1 16:19:25.999: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x90
> *Mar 1 16:19:26.003: Channel ID i = 0x89
> *Mar 1 16:19:26.003: Signal i = 0x05 - Confirm tone on
> *Mar 1 16:19:26.019: ISDN BR0: received HOST_PROCEEDING call_id 0x8010
> *Mar 1 16:19:30.431: ISDN BR0: RX <- DISCONNECT pd = 8 callref = 0x90
> *Mar 1 16:19:30.435: Cause i = 0x8095 - Call rejected
> *Mar 1 16:19:30.439: Signal i = 0x03 - Network congestion tone on
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:52 GMT-3