From: Timur_Mirza@xxxxxxxxxxxxxxxxxx
Date: Fri Feb 16 2001 - 16:42:38 GMT-3
need some feedback on the following please:
3 routers (1 hub & a couple of spokes) are in the same vlan
the two spokes are on DIFFERENT ipx nets...spoke #2 is running eigrp
i configured hub-e0 w/ 2 different networks using 2 different ipx encaps (it
looks like you cannot
use secondary IPX addresses w/ eigrp)
so i cfg rip from hub to spoke #1 & eigrp from hub to spoke #2
in order to prevent periodic saps on this vlan, i cfg ipx eigrp incremental sap
s
w/o rsup
what i think i should use is rsup on both rip & eigrp...what i'm wondering is,
is rsup
protocol-independent, i.e., can I use it under rip? the lab i'm working in is
currently in
transition & i cannot test it right now...can someone let me know if i'm on the
right path?
thx, timur
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:51 GMT-3