From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Fri Feb 16 2001 - 15:33:30 GMT-3
Are you including these loopbacks in an OSPF area (33) Task 3 step 12?. Do
you have them configured in BGP? If so, and you are using loopbacks as
neighbors between AS1 and AS2, are you using ebgp multihop? If advertising
into BGP on R3, the R4 should be learning via EBGP.
If not then AS3 would need to be transit area for R4 to learn those routes.
Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "ccie sin" <cciesin@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, February 16, 2001 11:40 AM
Subject: CCBootcamp - Lab 4
> Hi ,
> Was trying to configure OSPF.
> Everything is working fine.
> But i am puzzled that R4 don't have routes for R3
> Loopback interface , 10.33.1.33 and 10.33.1.65 ?
>
> These 2 interface can be seen/ping at other routers ..
> Any come can help ??
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:51 GMT-3