Jerky ping on ATM PVC

From: Nodir Nazarov (nodir@xxxxxxxxxxxx)
Date: Thu Feb 15 2001 - 18:21:15 GMT-3


   

Hello, The Group,

Can somebody point what is wrong please ?

Thank you,
Nodir

R1---LS1010----R2
R1#ping
Protocol [ip]:
Target IP address: 10.0.0.2
Repeat count [5]: 500
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 500, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
Success rate is 92 percent (462/500), round-trip min/avg/max = 1/6/1356 ms

R1:
interface ATM1/0
 no ip address
 no ip directed-broadcast
 atm ilmi-keepalive
!
interface ATM1/0.1 multipoint
 ip address 10.0.0.1 255.0.0.0
 no ip directed-broadcast
 pvc ip-ipx 0/50
  protocol ip 10.0.0.2 broadcast
  encapsulation aal5snap
 !
!

R2:
interface ATM1/0
 no ip address
 no ip directed-broadcast
 atm ilmi-keepalive
!
interface ATM1/0.1 multipoint
 ip address 10.0.0.2 255.255.255.0
 no ip directed-broadcast
 pvc ip-ipx 1/100
  protocol ip 10.0.0.1 broadcast
  encapsulation aal5snap
 !
!



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:50 GMT-3