From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Wed Feb 14 2001 - 13:22:33 GMT-3
You can hook a modem to the console just like the aux, but you need to
remember that you won't have any flow control so you should not change the
speed. Just set the modem to auto-answer and lock the speed to 9600, then
save the config (typically at&w0). Connect with the same connectors as an
AUX.
-Jason
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
John Huston
Sent: Wednesday, February 14, 2001 10:01 AM
To: Ccielab@Groupstudy. Com (E-mail)
Subject: Modem Connection Through the Console Port
Is is possible to connect a modem to the console port for remote
configuration on the Cisco 1600 series?
If so would you please help me with a sample configuration?
Thank you in advance for your assistance.
John Huston
Systems Engineer
A+ N+ CCDP, CNE, CCDP, MCSE
Choice Solutions, LLC
245 N. Waco, Suite 501
Wichita, KS 67202
(316) 761-2486 (Cell Phone)
(316) 264-4766 (Office)
(316) 264-8386 (Fax)
email: jhuston@choicesolutionsllc.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:48 GMT-3