From: Andrew G. Mason (andrew@xxxxxxxxxxxxx)
Date: Tue Feb 13 2001 - 13:55:41 GMT-3
Hi Tony,
I was advised by Elmeg to buy the c88m for the 3 * Internal S0s. This presents
three physical RJ45s that I can plug into three BRI interfaces and they work
fine.
You can do all of those commands apart from the SPIDs as the c88m supports the
BASIC-NET3 switch type that does not use SPIDs.
It is just like having a real ISDN connection between peers.
Andrew..
>===== Original Message From "tony chung" <crazychung@bigfoot.com> =====
>Hi andrew;
>
>I found it was cheaper to buy a C46e and an additional S0 card, does this
>config works?
>
>Also for the C88m, can the cisco device manage to use the 2 bri channels at
>the same time?
>Can this device enough for me to pratice the following cisco command?
>isdn spid
>sh isdn status
>debug isdn q921
>debug isdn q321
>
>regards,
>
>tony chung
>
>
>
>
>----- Original Message -----
>From: "Andrew G. Mason" <andrew@masontech.com>
>To: "ChrisH" <chrish@bjen.com>; "Kurt E. Radecki" <kradecki@cisco.com>;
><ccielab@groupstudy.com>
>Sent: Wednesday, December 20, 2000 11:57 PM
>Subject: RE: ISDN simulator
>
>
>> I use the Elmeg C88m from www.elmeg.com. It cost me around ?00 ($840) new
>and
>> is upgradeable to 11*S0. The basic model has 3*S0 and it also operates as
>a
>> PABX with analogue ports included, ideal for async routing/FXO VoIP
>> connections etc..
>>
>> This uses the Basic-NET3 switch type as it is European.
>>
>> It is a super piece of kit, works fine in my Cisco lab.
>>
>> Hope this helps.
>>
>>
>> Andrew..
>>
>>
>> >===== Original Message From "ChrisH" <chrish@bjen.com> =====
>> >the least expensive one that I have found is from Merge Technologies. It
>> >still costs ~$1800
>> >
>> >-----Original Message-----
>> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> >Kurt E. Radecki
>> >Sent: Wednesday, December 20, 2000 8:10 AM
>> >To: ccielab@groupstudy.com
>> >Subject: ISDN simulator
>> >
>> >
>> >Isn't there a relatively inexpensive ISDN simulator on the market today?
>> >Thanks.
>> >
>> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:47 GMT-3