From: Elias Aggelidis (eaggel@xxxxxxxxxxx)
Date: Sun Feb 11 2001 - 13:33:40 GMT-3
This is the all idea !
Only the hub router must speak with each other.
If R2 wants to speak with R5 it must pass
from R1 which is the HUB router.
Hope this helps
Regards
Elias Aggelidis
----- Original Message -----
From: "ccie sin" <cciesin@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 10, 2001 10:42 PM
Subject: ccboot lab 1
> Hi ,
> Finish the frame relay part.
> But the spoke routers could not ping each other, only
> the hub router can ping the spoke ?
> What's wrong ?
>
> hostname R1
> !
> enable password cisco
> !
> ip subnet-zero
> no ip domain-lookup
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no fair-queue
> clockrate 64000
> frame-relay lmi-type ansi
> !
> interface Serial0.1 multipoint
> ip address 10.10.1.1 255.255.0.0
> frame-relay map ip 10.10.1.2 102 broadcast
> frame-relay map ip 10.10.1.3 103 broadcast
> frame-relay map ip 10.10.1.5 105 broadcast
> !
> interface Serial1
> no ip address
> shutdown
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:46 GMT-3