From: Sandy Thielamay (sandyt@xxxxxxxxxx)
Date: Sat Feb 10 2001 - 10:11:08 GMT-3
Hello All,
Can anybody explain how are SAPs propagated to an NLSP network? =20
I have an access-list that I created to filter one sap advertisement =
(Fileserver type 4)
The access-list seems to work fine when I apply it on a router running =
IPX/EIGRP router but not on the one running purely NLSP.
Here is the access-list on the router that it works.
interface Serial0/0
ip address 10.10.1.3 255.255.0.0
ipx input-sap-filter 1000
ipx network 4
!
!
access-list 1000 deny 7.0a0e.0e0b.0001 4 FS1
access-list 1000 permit FFFFFFFF
Showing ipx servers, I can see it does the job.
Type Name Net Address Port Route =
Hops Itf
E 4 FS2 7.0a0b.0e0b.0001:0451 1787392/01 =
2 Se0/0
E 7 FS2 7.0a0b.0a0b.0001:0451 1787392/01 =
2 Se0/0
The same pattern applied on a different router running NLSP =
redistributing into EIGRP and vice-versa ...It works.=20
But if I apply it on another router that is connected to the same NLSP =
domain. I just does not work. I tried distribute-sap-list etc...in the =
"ipx router nlsp" process ....no success.
Any idea.
Cheers,
Sandy
=20
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3