From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Sat Feb 10 2001 - 04:04:35 GMT-3
Oops...this one's not mine...
I'll pass your suggestions to Steven...
Simon
-----Original Message-----
From: Jimmy Dotson [mailto:dotsonjl@epb.net]
Sent: Saturday, February 10, 2001 2:44 PM
To: Simon.Baxter@au.logical.com
Subject: Re: RE: ccbootcamp lab#1
I had problems with this type scenario the other night. Try adding "ip ospf
pri 255" to int S0.1 (i'm not sure if it will work on the S0 int). Give
that a try. It fixed my problem. I did it without broadcast statement.
The hub has to be the DR. Another way is to also set up all the spokes
with "ip ospf pri 0". What states are the OSPF neigh's in?
Also, it looks like the way the access lists / route maps are set you
everything destined for 10.10 goes to 10.10.1.2. Try making the
destinations on the ACLs more specific.
Jimmy Dotson
>>> Simon Baxter <Simon.Baxter@au.logical.com> 02/09/01 17:58 PM >>>
also, later down the track you'll find you cannot form ospf adjacencies.
You have no "broadcast" keyword on the map statements!!
-----Original Message-----
From: Steven Weber [mailto:itweber@netzero.net]
Sent: Friday, February 09, 2001 1:54 PM
To: ccielab@groupstudy.com
Subject: ccbootcamp lab#1
I'm having some problems with my config I can't get any of the spokes to
ping each other any suggestions.Current configuration:
!
version 11.2
!
hostname r1
!
!
no ip domain-lookup
ip host r2 2001 10.1.1.100
ip host r3 2002 10.1.1.100
ip host r4 2003 10.1.1.100
ip host r5 2004 10.1.1.100
ip host r7 2006 10.1.1.100
!
interface Loopback0
ip address 10.1.1.100 255.255.255.0
!
interface Ethernet0
ip address 10.100.100.1 255.255.0.0
no keepalive
!
interface Serial0
no ip address
encapsulation frame-relay
ip ospf priority 10
!
interface Serial0.1 multipoint
ip address 10.10.1.1 255.255.0.0
ip policy route-map FRAM
frame-relay map ip 10.10.1.2 102
frame-relay map ip 10.10.1.3 103
frame-relay map ip 10.10.1.5 105
!
interface Serial1
no ip address
shutdown
!
route ospf 1
network 10.10.0.0 0.0.255.255 area 0
network 10.100.0.0 0.0.255.255 area 1
neighbor 10.10.1.3 priority 1
neighbor 10.10.1.2 priority 1
neighbor 10.10.1.5 priority 1
!
ip classless
access-list 100 permit ip any 10.10.0.0 0.0.255.255
access-list 101 permit ip any 10.10.0.0 0.0.255.255
access-list 102 permit ip any 10.10.0.0 0.0.255.255
route-map FRAM permit 10
match ip address 100
set ip next-hop 10.10.1.2
!
route-map FRAM permit 20
match ip address 101
set ip next-hop 10.10.1.3
!
route-map FRAM permit 30
match ip address 102
set ip next-hop 10.10.1.5
!
!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3