From: John Kaberna (jkaberna@xxxxxxxxxxxx)
Date: Fri Feb 09 2001 - 23:39:08 GMT-3
I got it working. These configs are a little different though. In this
scenario only r5 is allowed to make calls to r6. r6 is not allowed to
initiate calls to r5. Also, r6 is the only one doing authentication. So
you will see the ppp auth callin command which allows for one way
authentication. If anyone sees a problem please let me know asap. See
attached text files.
John
----- Original Message -----
From: Simon Baxter <Simon.Baxter@au.logical.com>
To: K. Radecki <kradecki@yahoo.com>; <ccielab@groupstudy.com>
Sent: Friday, February 09, 2001 7:25 PM
Subject: RE: chap authentication
> Umm, nope. Good question.
>
> The ppp chap username command works fine but I too haven't got this
working.
> The docco's pretty thin on this eh?
>
> -----Original Message-----
> From: K. Radecki [mailto:kradecki@yahoo.com]
> Sent: Saturday, February 10, 2001 12:13 PM
> To: ccielab@groupstudy.com
> Subject: chap authentication
>
>
> Has anyone ever used the ppp chap password ... command
> successfully? If so, was it in the place of username
> <name> password <password> command(s)?
>
> Thanks.
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3