From: Steven Weber (itweber@xxxxxxxxxxx)
Date: Fri Feb 09 2001 - 11:20:44 GMT-3
did you put dial pool-memeber 1 on the bri int. Also, I've had experiences wher
e
for the call to go through you have to add a username and password on both side
s.
Hope this helps,
Regards,
Steve
David Fahed wrote:
> Hi group...
>
> I always configured the callback with the physical bri interface. I just trie
d
> to configure the callback on dialer interface and it didn't work.
> What I want R2 request R3 to callback. What happen R2 call R3 and establish t
he
> connection (R3 doesn't callback).
> Debug ppp nego : no problem see the callrequest on the parameter....
>
> Thanks in advance.
>
> My config:
> R3
> interface Dialer1
> ip address 10.100.100.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name R2
> dialer pool 1
> dialer string 500
> dialer-group 1
> ppp callback accept
> ppp authentication chap
>
> R2
> interface Dialer1
> ip address 10.100.100.1 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name R3
> dialer pool 1
> dialer string 506
> dialer-group 1
> ppp callback request
> ppp authentication chap
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:43 GMT-3