From: Kamran Sadiq (ksadiq@xxxxxxxxx)
Date: Thu Feb 08 2001 - 14:04:06 GMT-3
Can you please write down the process of compressing IOS images.
Which software are you using for compressing the IOS image ? what operating
system ?
----- Original Message -----
From: "Jason1" <jason1@v-labs.net>
To: "Keith Leonard" <Keith_Leonard@data3.com.au>
Cc: "Alan Basinger" <abasinge@swbell.net>; <ccielab@groupstudy.com>;
<nobody@groupstudy.com>; "Robert DeVito" <robertdevito@hotmail.com>;
<tariq_sharif@btinternet.com>
Sent: Thursday, February 08, 2001 3:39 AM
Subject: Re: 2500 Series Flash/RAM
> .mz
>
> ----- Original Message -----
> From: "Keith Leonard" <Keith_Leonard@data3.com.au>
> To: "Jason1" <jason1@v-labs.net>
> Cc: "Alan Basinger" <abasinge@swbell.net>; <ccielab@groupstudy.com>;
> <nobody@groupstudy.com>; "Robert DeVito" <robertdevito@hotmail.com>;
> <tariq_sharif@btinternet.com>
> Sent: Thursday, February 08, 2001 4:19 PM
> Subject: Re: 2500 Series Flash/RAM
>
>
> >
> > When you compress the image to a '.bin.Z' file, do you load it into
flash
> > as a '.bin', '.biz' or what?
> > I've tried lots of combinations but can't get the code to load. I've
> > compressed IOS 12.0(7) to about 7.2MB and it goes into flash ok, but
when
> I
> > reload it says 'File boot failed -- File not accessible'.
> > I've also specified where to boot from with 'boot system flash xxxxx'
etc.
> > Any Ideas?
> >
> > Cheers,
> > Keith
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:42 GMT-3