From: Frank Jimenez (franjime@xxxxxxxxx)
Date: Wed Feb 07 2001 - 19:06:08 GMT-3
__\|/___=\| |/=_\|/____
Frank Jimenez
franjime@cisco.com
At 04:04 PM 02/07/2001 -0500, you wrote:
>Or you can get a real switch like an Alteon....
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Earl Aboytes
>Sent: Wednesday, February 07, 2001 12:26 AM
>To: 'andrew.2.shore@bt.com '; 'wiwanczyk@tec-adv.com ';
>'ccielab@groupstudy.com '
>Subject: RE: CSS11000 configuration ....
>
>
>When configuring the CSS11000 switches it is important to remember the order
>of configuration
>Interface
>Circuit
>Service
>Owner
>Content
>
>********Interface*******
>
>interface ethernet-1
>bridge vlan 3
>
>*********Circuit**********
>
>circuit VLAN3
>ip address 10.0.0.1 255.255.255.252
>
>*******Service*********
>service S1
>ip address 192.168.1.200
>active
>
>service S2
>ip address 192.168.1.201
>
>*********owner and content********
>owner groupstudy.com
>content L4_Basic
>port 80
>protocol tcp
>vip address 192.168.1.100
>add service S1
>add service S2
>active
>
>Earl Aboytes, CCIE 6097
>
>
>
>-----Original Message-----
>From: andrew.2.shore@bt.com
>To: wiwanczyk@tec-adv.com; ccielab@groupstudy.com
>Sent: 2/6/2001 6:10 AM
>Subject: RE: CSS11000 configuration ....
>
>check ciscos web site there is tonnes
>
>
>Andrew Shore
>BTcd
>Information Systems Engineering
>Internet & Multimedia
>
>
>-----Original Message-----
>From: Wojtek Iwanczyk [mailto:wiwanczyk@tec-adv.com]
>Sent: 06 February 2001 13:56
>To: ccielab@groupstudy.com
>Subject: CSS11000 configuration ....
>
>
>I know this is off topic, but im going to ask anyway, :o)
>
>I am looking for sample configs for Cisco's (Arrowpoint) Content
>switches.
>ANYTHING would be greatly appreciated ..
>
>Thanx ..
>
>
>Wojtek
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:41 GMT-3