From: carl commander (carl_commander@xxxxxxxxxxx)
Date: Wed Feb 07 2001 - 21:15:14 GMT-3
Thanks All who helped in my time of need. The RJ-48 -- RJ-48
straight-through worked a treat.
Regards
Carl Commander
CCIE #5934
>From: "carl commander" <carl_commander@hotmail.com>
>Reply-To: "carl commander" <carl_commander@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: Help!! ATM interface issue
>Date: Wed, 07 Feb 2001 09:58:32
>
>Hi All
>
>Im hoping someone in the U.S can help me out.Im from UK and required U.S
>specific info...
>
>I am using a cisco 3660 with a 4-port ATM IMA module. The module is RJ-45
>in
>presentation. I would like to connect a port off this module directly into
>a
>T1 line. The T1 line is RJ-45 in presentation (or should that be RJ-48?)
>Anyway the cable will be RJ-45 to RJ-45/RJ-48, what are the pin-outs for
>this cable? Is it a standard straight-through cable or cross-over cable. Or
>is it a different variation of pin-outs.
>I assume this has been done many time before, any ideas?????
>
>
>Regards
>
>Carl Commander
>CCIE #5934
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3