From: Pablo Thoma (pthoma@xxxxxxxxxxxxx)
Date: Wed Feb 07 2001 - 11:33:11 GMT-3
Tariq,
Can you send your bgp config on the involved routers along
with sh ip int brie and
sh ip bgp output for some example prefix?
I personally do not have the book so i would need more output
to understand what is going on...
Thanks,
Pablo
On Wed, 7 Feb 2001, Tariq Sharif wrote:
> Group!
>
> Moved to Med manipulation pg 554, & I do NOT get the expected results. Jason
> suggested downgrading to IOS 11.2 (I'm using 12.x all around). This may fix
> it, but I did not have time to do it. Any volunteers to look at my configs?
>
> Is it within NDA to ask about IOS ver used in the R/S lab?
>
> Many thanks & regards.
>
> Tariq Sharif
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Tariq Sharif
> Sent: 06 February 2001 15:58
> To: Ccielab@Groupstudy. Com
> Subject: Easy BGP Q
>
>
> I'm doing "All in One CCIE lab study guide" lab 43. After changing local
> pref, according to page 553, RouterB should see 1.0.0.0 via RouterC as best
> route with Localpref of 200. I don't have this on RouterB.RouterD is as
> explained on page 553. Any ideas?
>
> Many thanks & regards.
>
> Tariq Sharif
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3