Help!! ATM interface issue

From: carl commander (carl_commander@xxxxxxxxxxx)
Date: Wed Feb 07 2001 - 09:58:32 GMT-3

• Next message: Justin Menga: "RE: Great Frame Relay Information Link"
• Previous message: Justin Menga: "RE: Default routes and default networks - some experiments"
• Next in thread: Johnny Gorham: "Re: Help!! ATM interface issue"
• Maybe reply: Johnny Gorham: "Re: Help!! ATM interface issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi All

Im hoping someone in the U.S can help me out.Im from UK and required U.S
specific info...

I am using a cisco 3660 with a 4-port ATM IMA module. The module is RJ-45 in
presentation. I would like to connect a port off this module directly into a
T1 line. The T1 line is RJ-45 in presentation (or should that be RJ-48?)
Anyway the cable will be RJ-45 to RJ-45/RJ-48, what are the pin-outs for
this cable? Is it a standard straight-through cable or cross-over cable. Or
is it a different variation of pin-outs.
I assume this has been done many time before, any ideas?????

Regards

Carl Commander
CCIE #5934

• Next message: Justin Menga: "RE: Great Frame Relay Information Link"
• Previous message: Justin Menga: "RE: Default routes and default networks - some experiments"
• Next in thread: Johnny Gorham: "Re: Help!! ATM interface issue"
• Maybe reply: Johnny Gorham: "Re: Help!! ATM interface issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3