From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Feb 06 2001 - 20:32:45 GMT-3
Someone had wanted a working config for snapshot routing using dialer
profiles without a dialer map statement. Here it is:
interface Dialer1
ip address 20.1.1.2 255.255.255.0
encapsulation ppp
dialer remote-name rp-14c-2621
dialer pool 1
dialer string 4720990
dialer snapshot 1
dialer-group 1
snapshot client 5 8 dialer
no fair-queue
ppp authentication chap
Here's where you can see it's working:
rp-13e-3620>sh dialer
BRI0/0 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0/0:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: snapshot
Interface bound to profile Di1
Time until disconnect 119 secs
Current call connected 00:05:03
Connected to 4720990 (rp-14c-2621)
BRI0/0:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
Di1 - dialer type = DIALER PROFILE
Brian
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:39 GMT-3