From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Feb 06 2001 - 10:58:45 GMT-3
You don't need the dialer-map for snapshot using Dialer Profiles, it works
without it (did it yesterday).
B.
On Tue, 6 Feb 2001 william.j.greenwood@mail.sprint.com wrote:
> I thought the same thing at first, but I followed the instructions and
> it does work. These are actual working configurations using 12.0(15)
> code. Notice ALL the DIALER commands on the dialer interface.
>
> Bill
>
> -----Original Message-----
> From: milton-moore [mailto:milton-moore@nc.rr.com]
> Sent: Monday, February 05, 2001 10:57 PM
> To: william.j.greenwood; ccielab; jacreyno
> Cc: milton-moore
> Subject: Re: IPX SNAPSHOT DDR w/Dialer Profiles
>
>
> The command:
>
> dialer map snapshot 1 8358662
>
> is not possible in a dialer interface. There is not a dialer map
> command in
> dialer profiles. [At least not in version 12.0(15)]
>
> You can use these two commands on a Dialer interface:
>
> dialer snapshot 1
> snapshot client 5 20
>
>
> Milton
>
>
>
> ----- Original Message -----
> From: <william.j.greenwood@mail.sprint.com>
> To: <ccielab@groupstudy.com>; <jacreyno@cisco.com>
> Sent: Wednesday, January 31, 2001 10:20 AM
> Subject: RE: IPX SNAPSHOT DDR w/Dialer Profiles
>
>
> > JR,
> >
> > Here you go.
> >
> > Snapshot Client:
> >
> > hostname r1
> > !
> > username r5 password 0 ccie
> > ip subnet-zero
> > no ip domain-lookup
> > isdn switch-type basic-ni
> > !
> > snip
> > !
> > interface BRI0
> > no ip address
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer rotary-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101 8358661
> > isdn spid2 0835866301 8358663
> > !
> > interface Dialer1
> > ip address 10.21.1.1 255.255.0.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer in-band
> > dialer idle-timeout 300
> > dialer map snapshot 1 8358662
> > dialer map ip 10.21.1.5 name r5 broadcast 8358662
> > dialer-group 1
> > snapshot client 5 20 suppress-statechange-update dialer
> > ppp quality 98
> > ppp authentication chap
> > !
> > router rip
> > network 10.0.0.0
> > !
> > snip
> >
> > Snapshot Server:
> >
> > !
> > hostname r5
> > !
> > username r1 password 0 ccie
> > ip subnet-zero
> > no ip domain-lookup
> > ip dvmrp route-limit 20000
> > isdn switch-type basic-ni
> > !
> > snip
> > !
> > interface BRI0
> > no ip address
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201 8358662
> > isdn spid2 0835866401 8358664
> > ppp authentication chap
> > ppp multilink
> > !
> > interface Dialer0
> > ip address 10.21.1.5 255.255.0.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer remote-name r1
> > dialer idle-timeout 300
> > dialer string 8358661
> > dialer pool 1
> > dialer-group 1
> > snapshot server 5
> > ppp authentication chap
> > !
> > router rip
> > network 10.0.0.0
> > !
> > snip
> >
> > -----Original Message-----
> > From: jacreyno [mailto:jacreyno@cisco.com]
> > Sent: Tuesday, January 30, 2001 1:03 AM
> > To: ccielab
> > Cc: jacreyno
> > Subject: IPX SNAPSHOT DDR w/Dialer Profiles
> >
> >
> > Does anyone have a working config of IPX Snapshot w/Dialer profiles?
> I
> > can
> > get it working fine with dialer maps...
> >
> > THanks!
> >
> > JR
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:38 GMT-3