From: Trojanowski A. Mark (mtrojano@xxxxxxxxx)
Date: Tue Feb 06 2001 - 10:49:00 GMT-3
Jake,
You need to use the default-information originate command under your ospf
network statement. This behaves like the redistribute command except it only
redistributes the default route.
HTH,
Mark
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
jaksec@lucent.com
Sent: Tuesday, February 06, 2001 8:42 AM
To: CCIE
Subject: OSPF redistribution
I am going thru an OSPF practice lab and cannot redistribute a Default route
(0.0.0.0). But I can redistribute other statics with no problem. I am using
the redistibute static command and am having no luck with the Default route.
The only way I can think of is using a Stub area which will automatically
advertise a default route to the other routers. Is this correct or is there
something else I can do. Any replys would be great !!
********************************************
Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
Network Systems Engineer
Lucent NetworkCare Professional Services
One North Shore Center
12 Federal St. Suite 420
Pittsburgh, Pa 15212
Office: 412-330-6336 Fax: 412-323-7665
Pager: 1-800-467-1467
Email: jaksec@lucent.com
********************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:38 GMT-3