RE: TIME

From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Mon Feb 05 2001 - 20:31:12 GMT-3

• Next message: Jason T. Rohm: "RE: IPSec Tunnel Mode vs IPINIP w/CET"
• Previous message: Ronnie Royston: "RE: TIME"
• Maybe in reply to: Faris Broussard: "TIME"
• Next in thread: Devender Singh: "RE: TIME"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I don't think the time-range would be active without a valid clock set on
the router

Cheers,Padhu

-----Original Message-----
From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
Sent: Monday, February 05, 2001 5:23 PM
To: Faris Broussard; ccielab@groupstudy.com
Subject: RE: TIME

cisco-northside-2900(config)#time test
cisco-northside-2900(config-)#?
Time range configuration commands:
  absolute absolute time and date
  default Set a command to its defaults
  exit Exit from time-range configuration mode
  no Negate a command or set its defaults
  periodic periodic time and date

cisco-northside-2900(config-)#

-----Original Message-----
From: Faris Broussard
Sent: Monday, February 05, 2001 3:07 PM
To: ccielab@groupstudy.com
Subject: TIME

Is there anyway to hardcode the time on a 2500 router with out using ntp? If
your using time sensitive stuff( in my case key chains) when you reboot the
router your stuck in 1993 again( and rip stops working.)
        Thanks

        Faris Broussard
        CCDA CCNP R/S + Security
        Global Data Systems
        Advanced Network Design, Implementation and Management
        Cisco Systems Gold Partner
        HP Openview Gold Partner
        www.GetGDS.com

• Next message: Jason T. Rohm: "RE: IPSec Tunnel Mode vs IPINIP w/CET"
• Previous message: Ronnie Royston: "RE: TIME"
• Maybe in reply to: Faris Broussard: "TIME"
• Next in thread: Devender Singh: "RE: TIME"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:37 GMT-3