From: YJC (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Mon Feb 05 2001 - 00:19:09 GMT-3
I have try it in frame-relay phy interface use command frame-relay map ip
addr 1.1.1.1 100
1.1.1.1 is new router ip address.it can also work.
----- Original Message -----
From: Brian Hescock <bhescock@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 03, 2001 3:17 AM
Subject: autoinstall over frame (update)
> I noticed in the archive that some people had questions if you could do
> autoinstall over frame using point-to-point, no one had tried it. I read
> over the doc on univercd (search on "autoinstall") and you can do it:
>
> 4R3(config-subif)#frame interface-dlci 105 prot ip 10.1.1.1
>
> 10.1.1.1 is the ip address of the remote router that's being installed.
>
> But now to actually try it (should work).
>
> Brian
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:36 GMT-3