From: Wade Edwards (wade.edwards@xxxxxxxxxxxxxxxxxxx)
Date: Sat Feb 03 2001 - 22:14:25 GMT-3
use the command
isdn incoming-voice data
on the router receiving the call and on the calling side you use
map-class dialer name
dialer voice-call
then
dialer map protocol_address class map class_name host name [broadcast]
phone_number
or
dialer string phone_number class map class
Hope this helps.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jason T. Rohm
Sent: Saturday, February 03, 2001 1:05 AM
To: CCIELIST (E-mail)
Subject: ISDN Outbound Call Type
I am attempting to force my router to call out and tell the telco that it is
a voice call. Does anyone know what the command to do this is?
Thank you,
Jason T. Rohm
Sr. Network Engineer
Wire Technologies, Inc
jtrohm@wiretech-inc.com
(920) 766-5172
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:35 GMT-3