From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Sat Feb 03 2001 - 13:24:14 GMT-3
Fatkid Lab 505 expert BGP /RIP
Question 5 :
Point 1)The dial-up line between R2 and R3 should also be brought up if
the serial line
between R3 and R5 exceeds 50% utilization.
Point 2)In this case the line should handle 1/3 of
the traffic from R3, that is destined for either the Ethernet network or
AS 300. The line
should go back down when the load on R3's Serial 1 port falls below
25%. Ensure the
dialup line does not bounce between up and down by using a 3 second
delay to bring
the line up or down.
My solution
interface Serial1
! no problem for point 1
backup delay 3 3
backup interface BRI0
backup load 50 25
------------------------------------------------
! Is it the correct answer for point 2 ?
traffic-shape rate 166000 42000 42000 1000
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:35 GMT-3