From: anand kumar (akkumar1000@xxxxxxxxx)
Date: Fri Feb 02 2001 - 15:59:12 GMT-3
try
1.adding the LDN, 7 digits after the spids.
2.adding the broadcast at the end of dialer map
3.Use debug ppp auth and observe the handshake.
4.reload the routers
Anand
--- David FAHED <dfahed@outremer.com> wrote:
> Try to add broadcast in the dialer map.
>
> "Bolcer, Matt" wrote:
>
> > anyone see any reasons for the encap failures when
> the dialer map shows the
> > path and the isdn info is okay (supposedly)?
> >
> > R2----------------- Teltone ISDN Simulator
> ----------------- R3
> >
> > R2 config:
> >
> > !
> > interface BRI0
> > ip address 196.1.1.26 255.255.255.0
> > ip directed-broadcast
> > encapsulation ppp
> > no ip route-cache
> > dialer idle-timeout 90
> > dialer map ip 196.1.1.29 name r3 8358664
> > dialer-group 1
> > isdn switch-type basic-dms100
> > isdn spid1 0835866101
> > isdn spid2 0835866301
> > ppp authentication chap
> > !
> > ip classless
> > no ip http server
> > !
> > dialer-list 1 protocol ip permit
> >
> > r2#sh isdn status
> > Global ISDN Switchtype = basic-dms100
> > ISDN BRI0 interface
> > dsl 0, interface ISDN Switchtype =
> basic-dms100
> > Layer 1 Status:
> > ACTIVE
> > Layer 2 Status:
> > TEI = 96, Ces = 1, SAPI = 0, State =
> MULTIPLE_FRAME_ESTABLISHED
> > I_Queue_Len 0, UI_Queue_Len 0
> > TEI = 97, Ces = 2, SAPI = 0, State =
> MULTIPLE_FRAME_ESTABLISHED
> > I_Queue_Len 0, UI_Queue_Len 0
> > Spid Status:
> > TEI 96, ces = 1, state = 5(init)
> > spid1 configured, no LDN, spid1 sent,
> spid1 valid
> > Endpoint ID Info: epsf = 0, usid = 1,
> tid = 1
> > TEI 97, ces = 2, state = 5(init)
> > spid2 configured, no LDN, spid2 sent,
> spid2 valid
> > Endpoint ID Info: epsf = 0, usid = 3,
> tid = 1
> > Layer 3 Status:
> > 0 Active Layer 3 Call(s)
> > Activated dsl 0 CCBs = 0
> > The Free Channel Mask: 0x80000003
> >
> > r3 config:
> > !
> > interface BRI0
> > ip address 196.1.1.29 255.255.255.0
> > ip directed-broadcast
> > encapsulation ppp
> > no ip route-cache
> > logging event subif-link-status
> > dialer idle-timeout 90
> > dialer map ip 196.1.1.26 name r2 8358661
> > dialer-group 1
> > isdn switch-type basic-dms100
> > isdn spid1 0835866201
> > isdn spid2 0835866401
> > no fair-queue
> > ppp authentication chap
> > !
> > ip classless
> > ip route 164.56.2.132 255.255.255.252 192.168.4.1
> > no ip http server
> > !
> > access-list 99 permit 192.57.1.1
> > access-list 100 permit ip any any
> > dialer-list 1 protocol ip permit
> >
> > r3#sh isdn status
> > Global ISDN Switchtype = basic-dms100
> > ISDN BRI0 interface
> > dsl 0, interface ISDN Switchtype =
> basic-dms100
> > Layer 1 Status:
> > ACTIVE
> > Layer 2 Status:
> > TEI = 94, Ces = 1, SAPI = 0, State =
> MULTIPLE_FRAME_ESTABLISHED
> > I_Queue_Len 0, UI_Queue_Len 0
> > TEI = 95, Ces = 2, SAPI = 0, State =
> MULTIPLE_FRAME_ESTABLISHED
> > I_Queue_Len 0, UI_Queue_Len 0
> > Spid Status:
> > TEI 94, ces = 1, state = 5(init)
> > spid1 configured, no LDN, spid1 sent,
> spid1 valid
> > Endpoint ID Info: epsf = 0, usid = 2,
> tid = 1
> > TEI 95, ces = 2, state = 5(init)
> > spid2 configured, no LDN, spid2 sent,
> spid2 valid
> > Endpoint ID Info: epsf = 0, usid = 4,
> tid = 1
> > Layer 3 Status:
> > 0 Active Layer 3 Call(s)
> > Activated dsl 0 CCBs = 0
> > The Free Channel Mask: 0x80000003
> > Total Allocated ISDN CCBs = 0
> >
> > r2#sh dialer map
> > Static dialer map ip 196.1.1.29 name r3 (8358662)
> on BRI0
> >
> > r3#sh dialer map
> > Static dialer map ip 196.1.1.26 name r2 (8358661)
> on BRI0
> >
> > r2#sh debug
> > Dial on demand:
> > Dial on demand events debugging is on
> > Generic IP:
> > IP packet debugging is on
> > PPP:
> > PPP packet display debugging is on
> > ISDN:
> > ISDN events debugging is on
> > ISDN Q931 packets debugging is on
> >
> > ISDN events debug DSLs. (On/Off/No DSL:1/0/-)
> > DSL 0 --> 1
> > 1 -
> >
> > ISDN Q931 packets debug DSLs. (On/Off/No
> DSL:1/0/-)
> > DSL 0 --> 1
> > 1 -
> >
> > r2# ping 196.1.1.29
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 196.1.1.29,
> timeout is 2 seconds:
> >
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, sending
> > 1d18h: BRI0 DDR: Dialing cause ip (s=196.1.1.26,
> d=196.1.1.29)
> > 1d18h: BRI0 DDR: Attempting to dial 8358662
> > 1d18h: ISDN BR0: Outgoing call id = 0x800A, dsl 0
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, encapsulation
> > fai
> > led
> > 1d18h: ISDN BR0: Event: Call to 8358662 at 64 Kb/s
> > 1d18h: ISDN BR0: process_bri_call(): call id
> 0x800A, called_number 8358662,
> > spee
> > d 64, call type DATA
> > 1d18h: CC_CHAN_GetIdleChanbri: dsl 0
> > 1d18h: Found idle channel B1
> > 1d18h: ISDN BR0: TX -> SETUP pd = 8 callref =
> 0x0A
> > 1d18h: Bearer Capability i = 0x8890
> > 1d18h: Channel ID i = 0x83
> > 1d18h: Called Party Number i = 0x80,
> '8358662'
> > 1d18h: Sending Complete
> > 1d18h: ISDN BR0: RX <- CALL_PROC pd = 8 callref
> = 0x8A
> > 1d18h: Channel ID i = 0x89
> > 1d18h: Locking Shift to Codeset 5
> > 1d18h: Codeset 5 IE 0x2A i = 0x809402,
> '`=', 0x8307, '8358662',
> > 0x8E0B2
> > 0, 'TELTONE', 0x20, '2', 0x20
> > 1d18h.: ISDN BR0: received HOST_PROCEEDING call_id
> 0x800A
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, sending
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, encapsulation
> > fai
> > led.
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, sending
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, encapsulation
> > fai
> > led.
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, sending
> > 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29
> (BRI0), len 100, encapsulation
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:34 GMT-3