From: Greg Ferro (gferro@xxxxxxxxxxxxxxxxxxx)
Date: Thu Feb 01 2001 - 18:58:53 GMT-3
Absolutely correct.
At 03:32 PM 1/02/2001 -0600, you wrote:
>Someone is GOING to correct me if I am wrong....but I have an untested
>suggestion:
>
>1. Add the "no-export" community to ALL eBGP routes coming into your AS.
>
>2. Modify the peering relationship with ALL your iBGP peers so that the
>community will be passed on. By default sending the community is turned
>off.
>
>
>router bgp 1
>neighbor 2.3.4.5 remote-as 1
>neighbor 2.3.4.5 send-community
>neighbor 1.2.3.4 remote-as 2
>neighbor 1.2.3.4 route-map CommSet in
>route map CommSet
> set community no-export
>
>Then NO routes LEARNED from eBGP sources will be advertised OUTSIDE the
>AS because they are tagged with the no-export attribute. They will,
>however, be propagated within the AS, since sending the route to an
>internal neighbor isn't "exporting" it.
>
>Since incoming routes are not re-advertised outside the AS, you will
>not have a transit AS.
>
>
>On Thu, 1 Feb 2001, Mike S. Lee wrote:
>
> > Can any one please explain how to make an AS non-transient. I can do this
> > with an AS-Path ( ^$) but how would this be accomplished without using an
> > AS-Path filter. I have exhausted Halabi and just need to be pushed in the
> > right direction. Thanks for any help you can provide.
> >
> > Mike Lee
> > CCNP+LATM+Security+Voice Access/CCDP
> > NNCSE/NNCDE
> > Cisco Systems, Inc.
> > 12515 Research Blvd., Bldg. 04
> > Austin, TX 78759-2200
> >
> > DSL Customer Support Engineering
> > mikele@cisco.com
> > (512)378-1331 ofc
> > Text Page: mikele@epage.cisco.com
> > Mike Lee
> > CCNP+LATM+Security+Voice Access/CCDP
> > NNCSE/NNCDE
> > Cisco Systems, Inc.
> > 12515 Research Blvd., Bldg. 04
> > Austin, TX 78759-2200
> >
> > DSL Customer Support Engineering
> > mikele@cisco.com
> > (512)378-1331 ofc
> > Text Page: mikele@epage.cisco.com
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:33 GMT-3