From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Thu Feb 01 2001 - 14:24:04 GMT-3
Your Spid2 is not valid for both the ends. Try turning off ppp multilink and
try to establish the call using the channel that corresponds to the valid
spid or identify what is wrong with your second spid.
Regards
Atif
>From: Dennis Laganiere <DennisL@advancedbionics.com>
>Reply-To: Dennis Laganiere <DennisL@advancedbionics.com>
>To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: Another basic ISDN problem
>Date: Wed, 31 Jan 2001 15:32:07 -0800
>
>I posted this on the regular cisco group, but so far nothing anyone has
>tried has worked...
>
>---------
>I'm trying to get a new ISDN simulator to work in the in lab. It's an
>Emutel Lite, and I seem to be close, but not quite there yet on the
>configuration. I've attached both router configurations, the "show ISDN
>status" and "show Int BRI 0" output, as well as what the "debug ISDN"
>commands provide.
>
>Any thoughts are welcome...
>
>--- Dennis
>
>
>Router configurations
>routera#s ru
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname routera
>!
>enable password cisco
>!
>username routerb password 0 cisco
>ip subnet-zero
>no ip domain-lookup
>isdn switch-type basic-dms100
>!
>!
>!
>interface Ethernet0
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> no ip mroute-cache
> shutdown
>!
>interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface BRI0
> ip address 196.1.1.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 90
> dialer map ip 196.1.1.2 name routerb broadcast 8995201
> dialer load-threshold 1 outbound
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 5101 8995101
> isdn spid2 5102 8995102
> no fair-queue
> ppp authentication chap
> ppp multilink
>!
>ip classless
>!
>dialer-list 1 protocol ip permit
>alias exec co config t
>!
>line con 0
> password cisco
> login
>line aux 0
> password cisco
> login
>line vty 0 4
> password cisco
> login
>!
>end
>
>routerb#s ru
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname routerb
>!
>enable password cisco
>!
>username routera password 0 cisco
>ip subnet-zero
>no ip domain-lookup
>isdn switch-type basic-dms100
>!
>!
>!
>interface Ethernet0
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> no ip mroute-cache
> shutdown
>!
>interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface BRI0
> ip address 196.1.1.2 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 90
> dialer map ip 196.1.1.1 name routera
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 5201 8995201
> isdn spid2 5202 8995202
> ppp authentication chap
> ppp multilink
>!
>ip classless
>!
>dialer-list 1 protocol ip permit
>alias exec co config t
>!
>line con 0
> password cisco
> login
>line aux 0
> password cisco
> login
>line vty 0 4
> password cisco
> login
>!
>end
>
>routerb#
>
>Show ISDN Status commands
>routera#s isdn sta
>Global ISDN Switchtype = basic-dms100
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> Spid Status:
> TEI 64, ces = 1, state = 5(init)
> spid1 configured, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 2, tid = 2
> TEI 65, ces = 2, state = 4(await init)
> spid2 configured, spid2 sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>routera#
>
>routera#s int bri 0
>BRI0 is up, line protocol is up (spoofing)
> Hardware is BRI
> Internet address is 196.1.1.1/24
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255
> Encapsulation PPP, loopback not set
> Last input 00:00:04, output 00:00:04, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 450 packets input, 2513 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 450 packets output, 2458 bytes, 0 underruns
> 0 output errors, 0 collisions, 5 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 5 carrier transitions
>routera#
>
>routerb#
>routerb#s isdn sta
>Global ISDN Switchtype = basic-dms100
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> Spid Status:
> TEI 64, ces = 1, state = 5(init)
> spid1 configured, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 2, tid = 2
> TEI 65, ces = 2, state = 4(await init)
> spid2 configured, spid2 sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>routerb#
>
>
>
>Show Interface BRI 0 commands
>routera#s int bri 0
>BRI0 is up, line protocol is up (spoofing)
> Hardware is BRI
> Internet address is 196.1.1.1/24
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255
> Encapsulation PPP, loopback not set
> Last input 00:00:04, output 00:00:04, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 450 packets input, 2513 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 450 packets output, 2458 bytes, 0 underruns
> 0 output errors, 0 collisions, 5 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 5 carrier transitions
>routera#
>
>routerb#s int bri 0
>BRI0 is up, line protocol is up (spoofing)
> Hardware is BRI
> Internet address is 196.1.1.2/24
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255
> Encapsulation PPP, loopback not set
> Last input 00:00:04, output 00:00:04, output hang never
> Last clearing of "show interface" counters never
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max total/threshold/drops)
> Conversations 0/1/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 318 packets input, 1285 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 318 packets output, 1305 bytes, 0 underruns
> 0 output errors, 0 collisions, 3 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 1 carrier transitions
>routerb#
>
>
>routera#
>routera#debug isdn event
>ISDN events debugging is on
>routera#debug isdn q921
>ISDN Q921 packets debugging is on
>routera#debug isdn q931
>00:23:26: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:23:26: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:23:27: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 61
>00:23:28: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 41
>ISDN Q931 packets debugging is on
>routera#
>00:23:36: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:23:36: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:23:38: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 61
>00:23:38: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 41
>00:23:46: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:23:46: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:23:48: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 61
>00:23:48: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 41
>routera#
>routera#
>routera#ping 196.1.1.2
>
>Type escape sequence to abort.
>Sending 5, 100-byte ICMP Echos to 196.1.1.2, timeout is 2 seconds:
>
>00:23:55: ISDN BR0: Outgoing call id = 0x8015
>00:23:55: ISDN BR0: Event: Call to 8995201 at 64 Kb/s
>00:23:55: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 41 nr = 61 i =
>0x080115050402889018018370088038393935323031
>00:23:55: SETUP pd = 8 callref = 0x15
>00:23:55: Bearer Capability i = 0x8890
>00:23:55: Channel ID i = 0x83
>00:23:55: Called Party Number i = 0x80, '8995201'
>00:23:55: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 42
>00:23:55: ISDN BR0: RX <- INFOc sapi .= 0 tei = 64 ns = 61 nr = 42 i =
>0x08019502180189340105
>00:23:55: CALL_PROC pd = 8 callref = 0x95
>00:23:55: Channel ID i = 0x89
>00:23:55: Signal i = 0x05 - Confirm tone on
>00:23:55: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 62
>00:23:55: ISDN BR0: received HOST_PROCEEDING call_id 0x8015
>00:23:55: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 62 nr = 42 i =
>0x0801954508028081340103
>00:23:55: DISCONNECT pd = 8 callref = 0x95
>00:23:55: Cause i = 0x8081 - Unallocated/unassigned number
>00:23:55: Signal i = 0x03 - Network congestion tone on
>00:23:55: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 63
>00:23:55: ISDN BR0: received HOST_DISCONNECT call_id 0x8015
>00:23:55: ISDN BR0: Event: Call to 8995201 was hung up.
>00:23:55: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 42 nr = 63 i =
>0x0801154D
>00:23:55: RELEASE pd = 8 callref = 0x15
>00:23:55: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 43
>00:23:55: ISDN BR0: RX <- INFOc sapi = 0 tei .= 64 ns = 63 nr = 43 i =
>0x0801955A34013F
>00:23:55: RELEASE_COMP pd = 8 callref = 0x95
>00:23:55: Signal i = 0x3F - Tones off
>00:23:55: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 64
>00:23:55: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x8015
>00:23:56: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:23:56: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:23:57: ISDN BR0: Outgoing call id = 0x8016
>00:23:57: ISDN BR0: Event: Call to 8995201 at 64 Kb/s
>00:23:57: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 43 nr = 64 i =
>0x080116050402889018018370088038393935323031
>00:23:57: SETUP pd = 8 callref = 0x16
>00:23:57: Bearer Capability i = 0x8890
>00:23:57: Channel ID i = 0x83
>00:23:57: Called Party Number i = 0x80, '8995201'
>00:23:57: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 44
>00:23:57: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 64 nr = 44 i =
>0x08019602180189340105
>00:23:57: CALL_PROC pd = 8 callref = 0x96
>00:23:57: .Channel ID i = 0x89
>00:23:57: Signal i = 0x05 - Confirm tone on
>00:23:57: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 65
>00:23:57: ISDN BR0: received HOST_PROCEEDING call_id 0x8016
>00:23:57: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 65 nr = 44 i =
>0x0801964508028081340103
>00:23:57: DISCONNECT pd = 8 callref = 0x96
>00:23:57: Cause i = 0x8081 - Unallocated/unassigned number
>00:23:57: Signal i = 0x03 - Network congestion tone on
>00:23:57: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 66
>00:23:57: ISDN BR0: received HOST_DISCONNECT call_id 0x8016
>00:23:57: ISDN BR0: Event: Call to 8995201 was hung up.
>00:23:57: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 44 nr = 66 i =
>0x0801164D
>00:23:57: RELEASE pd = 8 callref = 0x16
>00:23:57: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 45
>00:23:57: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 66 nr = 45 i =
>0x0801965A34013F
>00:23:57: RELEASE_COMP pd = 8 callref = 0x96
>00:23:57: Signal i = 0.x3F - Tones off
>00:23:57: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 67
>00:23:57: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x8016
>00:23:59: ISDN BR0: Outgoing call id = 0x8017
>00:23:59: ISDN BR0: Event: Call to 8995201 at 64 Kb/s
>00:23:59: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 45 nr = 67 i =
>0x080117050402889018018370088038393935323031
>00:23:59: SETUP pd = 8 callref = 0x17
>00:23:59: Bearer Capability i = 0x8890
>00:23:59: Channel ID i = 0x83
>00:23:59: Called Party Number i = 0x80, '8995201'
>00:23:59: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 46
>00:23:59: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 67 nr = 46 i =
>0x08019702180189340105
>00:23:59: CALL_PROC pd = 8 callref = 0x97
>00:23:59: Channel ID i = 0x89
>00:23:59: Signal i = 0x05 - Confirm tone on
>00:23:59: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 68
>00:23:59: ISDN BR0: received HOST_PROCEEDING call_id 0x8017
>00:23:59: ISDN BR0: RX <- INFOc sapi = 0 tei = .
>Success rate is 0 percent (0/5)
>routera#64 ns = 68 nr = 46 i = 0x0801974508028081340103
>00:23:59: DISCONNECT pd = 8 callref = 0x97
>00:23:59: Cause i = 0x8081 - Unallocated/unassigned number
>00:23:59: Signal i = 0x03 - Network congestion tone on
>00:23:59: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 69
>00:23:59: ISDN BR0: received HOST_DISCONNECT call_id 0x8017
>00:23:59: ISDN BR0: Event: Call to 8995201 was hung up.
>00:23:59: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 46 nr = 69 i =
>0x0801174D
>00:23:59: RELEASE pd = 8 callref = 0x17
>00:23:59: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 47
>00:23:59: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 69 nr = 47 i =
>0x0801975A34013F
>00:23:59: RELEASE_COMP pd = 8 callref = 0x97
>00:23:59: Signal i = 0x3F - Tones off
>00:23:59: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 70
>00:23:59: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x8017
>00:24:01: ISDN BR0: Outgoing call id = 0x8018
>00:24:01: ISDN BR0: Event: Call to 8995201 at 64 Kb/s
>00:24:01: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 47 nr = 70 i =
>0x080118050402889018018370088038393935323031
>00:24:01: SETUP pd = 8 callref = 0x18
>00:24:01: Bearer Capability i = 0x8890
>00:24:01: Channel ID i = 0x83
>00:24:01: Called Party Number i = 0x80, '8995201'
>00:24:01: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 48
>00:24:01: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 70 nr = 48 i =
>0x08019802180189340105
>00:24:01: CALL_PROC pd = 8 callref = 0x98
>00:24:01: Channel ID i = 0x89
>00:24:01: Signal i = 0x05 - Confirm tone on
>00:24:01: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 71
>00:24:01: ISDN BR0: received HOST_PROCEEDING call_id 0x8018
>00:24:01: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 71 nr = 48 i =
>0x0801984508028081340103
>00:24:01: DISCONNECT pd = 8 callref = 0x98
>00:24:01: Cause i = 0x8081 - Unallocated/unassigned number
>00:24:01: Signal i = 0x03 - Network congestion tone on
>00:24:01: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 72
>00:24:01: ISDN BR0: received HOST_DISCONNECT call_id 0x8018
>00:24:01: ISDN BR0: Event: Call to 8995201 was hung up.
>00:24:01: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 48 nr = 72 i =
>0x0801184D
>00:24:01: RELEASE pd = 8 callref = 0x18
>00:24:01: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 49
>00:24:01: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 72 nr = 49 i =
>0x0801985A34013F
>00:24:01: RELEASE_COMP pd = 8 callref = 0x98
>00:24:01: Signal i = 0x3F - Tones off
>00:24:01: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 73
>00:24:01: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x8018
>00:24:03: ISDN BR0: Outgoing call id = 0x8019
>00:24:03: ISDN BR0: Event: Call to 8995201 at 64 Kb/s
>00:24:03: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 49 nr = 73 i =
>0x080119050402889018018370088038393935323031
>00:24:03: SETUP pd = 8 callref = 0x19
>00:24:03: Bearer Capability i = 0x8890
>00:24:03: Channel ID i = 0x83
>00:24:03: Called Party Number i = 0x80, '8995201'
>00:24:03: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 50
>00:24:03: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 73 nr = 50 i =
>0x08019902180189340105
>00:24:03: CALL_PROC pd = 8 callref = 0x99
>00:24:03: Channel ID i = 0x89
>00:24:03: Signal i = 0x05 - Confirm tone on
>00:24:03: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 74
>00:24:03: ISDN BR0: received HOST_PROCEEDING call_id 0x8019
>00:24:03: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 74 nr = 50 i =
>0x0801994508028081340103
>00:24:03: DISCONNECT pd = 8 callref = 0x99
>00:24:03: Cause i = 0x8081 - Unallocated/unassigned number
>00:24:03: Signal i = 0x03 - Network congestion tone on
>00:24:03: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 75
>00:24:03: ISDN BR0: received HOST_DISCONNECT call_id 0x8019
>00:24:03: ISDN BR0: Event: Call to 8995201 was hung up.
>00:24:03: ISDN BR0: TX -> INFOc sapi = 0 tei = 64 ns = 50 nr = 75 i =
>0x0801194D
>00:24:03: RELEASE pd = 8 callref = 0x19
>00:24:03: ISDN BR0: RX <- RRr sapi = 0 tei = 64 nr = 51
>00:24:03: ISDN BR0: RX <- INFOc sapi = 0 tei = 64 ns = 75 nr = 51 i =
>0x0801995A34013F
>00:24:03: RELEASE_COMP pd = 8 callref = 0x99
>00:24:03: Signal i = 0x3F - Tones off
>00:24:03: ISDN BR0: TX -> RRr sapi = 0 tei = 64 nr = 76
>00:24:03: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x8019
>00:24:06: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:24:06: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:24:13: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 76
>00:24:13: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 51
>routera#
>00:24:16: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:24:16: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>routera#u all
>All possible debugging has been turned off
>routera#
>
>routerb#
>routerb#
>routerb#debug isdn even
>ISDN events debugging is on
>routerb#debug isdn q921
>ISDN Q921 packets debugging is on
>routerb#debug isdn q931
>00:24:27: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 1
>00:24:27: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 1
>ISDN Q931 packets debugging is on
>routerb#
>routerb#
>00:24:33: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:24:33: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>00:24:37: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 1
>00:24:37: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 1
>00:24:43: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:24:43: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2
>routerb#
>routerb#ping 196.1.1.1
>
>Type escape sequence to abort.
>Sending 5, 100-byte ICMP Echos to 196.1.1.1, timeout is 2 seconds:
>
>00:24:47: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 1
>00:24:47: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 1..
>00:24:53: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:24:53: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2...
>Success rate is 0 percent (0/5)
>routerb#
>00:24:57: ISDN BR0: TX -> RRp sapi = 0 tei = 64 nr = 1
>00:24:57: ISDN BR0: RX <- RRf sapi = 0 tei = 64 nr = 1
>routerb#
>routerb#
>routerb#
>00:25:03: ISDN BR0: TX -> RRp sapi = 0 tei = 65 nr = 0
>00:25:03: ISDN BR0: RX <- RRf sapi = 0 tei = 65 nr = 2uall
>Translating "uall"
>% Unknown command or computer name, or unable to find computer address
>routerb#u all
>All possible debugging has been turned off
>routerb#
>routerb#
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:33 GMT-3