RE: dlsw question

From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Thu Feb 01 2001 - 00:11:32 GMT-3


   
Sorry Steve,
I don,t think getting annoyed is the solution. He gave the answer. and that
is it.

Devender Singh
BE(Hons), CCNP
IP Solution Specialist

-----Original Message-----
From: Steve Clubb [mailto:sclubb@cattech.com]
Sent: Thursday, 1 February 2001 9:09
To: 'Justin Menga'; 'Bill Dellamar'; ccielab@groupstudy.com
Subject: RE: dlsw question

Justin -

You can so verbose it's annoying.

Steve

-----Original Message-----
From: Justin Menga [mailto:Justin.Menga@computerland.co.nz]
Sent: Wednesday, January 31, 2001 1:53 PM
To: 'Bill Dellamar'; ccielab@groupstudy.com
Subject: RE: dlsw question

OR

Regards,

Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz

-----Original Message-----
From: Bill Dellamar [mailto:wdellamar@yahoo.com]
Sent: Thursday, 1 February 2001 7:25 a.m.
To: ccielab@groupstudy.com
Subject: dlsw question

All,
Does anybody know if the following results in an and
condition or an or condition when applied to :

dlsw remote-peer 0 tcp 1.1.1.1 host-netbios-out Mlist
lsap-output-list 200 dmac-output-list 700

If access-list 700 denied 0000.0c00.0000
0000.00ff.ffff
access-list 200 denied netbios
Mlist denies PC*

Does this read: all stations with PC going to netbios
with a mac in the range of 0000.0c00.0000 to
0000.0cff.ffff are denied.

Or does this read: All stations with PC are denied
All stations going to netbios are denied
All stations with the mac range is denied.

Is it an or or and condition when applied to dlsw?
Thanks,



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:50 GMT-3