From: Simon Hope (shope@xxxxxxxxxxx)
Date: Wed Jan 31 2001 - 19:09:41 GMT-3
is there any way of using an access-expression in a dlsw remote peer stmt to
get a combination of "AND" / "OR"
Cheers
Simon
(3 days!)
----- Original Message -----
From: "Justin Menga" <Justin.Menga@computerland.co.nz>
To: "'Bill Dellamar'" <wdellamar@yahoo.com>; <ccielab@groupstudy.com>
Sent: Wednesday, January 31, 2001 9:53 PM
Subject: RE: dlsw question
> OR
>
> Regards,
>
> Justin Menga CCIE #6640 MCSE+I CCSE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
>
> -----Original Message-----
> From: Bill Dellamar [mailto:wdellamar@yahoo.com]
> Sent: Thursday, 1 February 2001 7:25 a.m.
> To: ccielab@groupstudy.com
> Subject: dlsw question
>
>
> All,
> Does anybody know if the following results in an and
> condition or an or condition when applied to :
>
> dlsw remote-peer 0 tcp 1.1.1.1 host-netbios-out Mlist
> lsap-output-list 200 dmac-output-list 700
>
> If access-list 700 denied 0000.0c00.0000
> 0000.00ff.ffff
> access-list 200 denied netbios
> Mlist denies PC*
>
> Does this read: all stations with PC going to netbios
> with a mac in the range of 0000.0c00.0000 to
> 0000.0cff.ffff are denied.
>
> Or does this read: All stations with PC are denied
> All stations going to netbios are denied
> All stations with the mac range is denied.
>
> Is it an or or and condition when applied to dlsw?
> Thanks,
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:50 GMT-3