From: David M Anderson (dma@xxxxxxxxx)
Date: Wed Jan 31 2001 - 14:02:35 GMT-3
Matt,
I would make sure the number you are dialing on R2 (in the dialer map statement
) is the phone number that R3 is respectively assigned. If that doesn't solve
your problem I would try getting rid of the PPP auth stuff and then do a shut n
o shut on the bri interface and see if that helps.
David
At 10:22 AM 01/31/2001 -0500, Bolcer, Matt wrote:
>anyone see any reasons for the encap failures when the dialer map shows the
>path and the isdn info is okay (supposedly)?
>
>R2----------------- Teltone ISDN Simulator ----------------- R3
>
>R2 config:
>
>!
>interface BRI0
> ip address 196.1.1.26 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> dialer idle-timeout 90
> dialer map ip 196.1.1.29 name r3 8358664
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 0835866101
> isdn spid2 0835866301
> ppp authentication chap
>!
>ip classless
>no ip http server
>!
>dialer-list 1 protocol ip permit
>
>
>r2#sh isdn status
>Global ISDN Switchtype = basic-dms100
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 96, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> TEI = 97, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> Spid Status:
> TEI 96, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 1, tid = 1
> TEI 97, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 3, tid = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
>
>r3 config:
>!
>interface BRI0
> ip address 196.1.1.29 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> logging event subif-link-status
> dialer idle-timeout 90
> dialer map ip 196.1.1.26 name r2 8358661
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 0835866201
> isdn spid2 0835866401
> no fair-queue
> ppp authentication chap
>!
>ip classless
>ip route 164.56.2.132 255.255.255.252 192.168.4.1
>no ip http server
>!
>access-list 99 permit 192.57.1.1
>access-list 100 permit ip any any
>dialer-list 1 protocol ip permit
>
>r3#sh isdn status
>Global ISDN Switchtype = basic-dms100
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 94, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> TEI = 95, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> Spid Status:
> TEI 94, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 2, tid = 1
> TEI 95, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 4, tid = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>
>r2#sh dialer map
>Static dialer map ip 196.1.1.29 name r3 (8358662) on BRI0
>
>r3#sh dialer map
>Static dialer map ip 196.1.1.26 name r2 (8358661) on BRI0
>
>r2#sh debug
>Dial on demand:
> Dial on demand events debugging is on
>Generic IP:
> IP packet debugging is on
>PPP:
> PPP packet display debugging is on
>ISDN:
> ISDN events debugging is on
> ISDN Q931 packets debugging is on
>
> ISDN events debug DSLs. (On/Off/No DSL:1/0/-)
> DSL 0 --> 1
> 1 -
>
> ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-)
> DSL 0 --> 1
> 1 -
>
>r2# ping 196.1.1.29
>Type escape sequence to abort.
>Sending 5, 100-byte ICMP Echos to 196.1.1.29, timeout is 2 seconds:
>
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
>1d18h: BRI0 DDR: Dialing cause ip (s=196.1.1.26, d=196.1.1.29)
>1d18h: BRI0 DDR: Attempting to dial 8358662
>1d18h: ISDN BR0: Outgoing call id = 0x800A, dsl 0
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
>fai
>led
>1d18h: ISDN BR0: Event: Call to 8358662 at 64 Kb/s
>1d18h: ISDN BR0: process_bri_call(): call id 0x800A, called_number 8358662,
>spee
>d 64, call type DATA
>1d18h: CC_CHAN_GetIdleChanbri: dsl 0
>1d18h: Found idle channel B1
>1d18h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0A
>1d18h: Bearer Capability i = 0x8890
>1d18h: Channel ID i = 0x83
>1d18h: Called Party Number i = 0x80, '8358662'
>1d18h: Sending Complete
>1d18h: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8A
>1d18h: Channel ID i = 0x89
>1d18h: Locking Shift to Codeset 5
>1d18h: Codeset 5 IE 0x2A i = 0x809402, '`=', 0x8307, '8358662',
>0x8E0B2
>0, 'TELTONE', 0x20, '2', 0x20
>1d18h.: ISDN BR0: received HOST_PROCEEDING call_id 0x800A
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
>fai
>led.
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
>fai
>led.
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
>fai
>led.
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
>1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
>fai
>led.
>Success rate is 0 percent (0/5)
>r2#
>1d18h: BRI0: wait for isdn carrier timeout, call id=0x800A
>1d18h: ISDN BR0: Event: Hangup call to call id 0x800A ces = 1
>1d18h: ISDN BR0: process_disconnect(): call id 0x800A, call type is DATA,
>b_idb
>0x2617CEC, ces 1
>1d18h: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x0A
>1d18h: Cause i = 0x8090 - Normal call clearing
>1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x8A
>1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x0A
>1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x800A
>1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
>
>
>r3 debug...
>
>1d18h: ISDN BR0: RX <- SETUP pd = 8 callref = 0x34
>1d18h: Bearer Capability i = 0x8890
>1d18h: Channel ID i = 0x89
>1d18h: Signal i = 0x40 - Alerting on - pattern 0
>1d18h: ENDPOINT IDent i = 0x8281
>1d18h: Calling Party Number i = 'A', 0x81, '8358661'
>1d18h: Called Party Number i = 0xC1, '8358662'
>1d18h: ISDN BR0: Incoming call id = 0x10, dsl 0
>1d18h: ISDN BR0: received HOST_INCOMING_CALL call_id 0x10
>1d18h: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE
>1d18h: ISDN BR0: Event: Received a DATA call from 8358661 on B1 at 64 Kb/s
>1d18h: ISDN BR0: RM returned call_type 0 resource type 0
>1d18h: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0xB4
>1d18h: Channel ID i = 0x89
>1d18h: ISDN BR0: isdn_send_connect(): msg 4, call id 0x10, ces 1 bchan 0,
>call t
>ype DATA
>1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
>1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
>1d18h: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x10
>1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
>1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x34
>1d18h: Cause i = 0x8290 - Normal call clearing
>1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB4
>1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x10
>1d18h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 ,
>call la
>sted 30 seconds
>1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
>1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3