From: Ifeanyi Eze (ieze@xxxxxxxxxxxx)
Date: Tue Jan 30 2001 - 13:13:53 GMT-3
Your R2 and R3 probably have no route to each other. Remove the access list
in R3, and provide a static route: example
Ip route 196.1.1.0 255.255.255.0 bri 0
Apply the above config to both R3 and R2 and I hope you configured username
and password on both Routers. Your isdn layers 1 and 2 are ok but layer 3
traffic is not going through due to lack of route.
Good luck
Eze
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bolcer, Matt
Sent: Wednesday, January 31, 2001 10:22 AM
To: ccielab@groupstudy.com
Subject: basic isdn setup problem
anyone see any reasons for the encap failures when the dialer map shows the
path and the isdn info is okay (supposedly)?
R2----------------- Teltone ISDN Simulator ----------------- R3
R2 config:
!
interface BRI0
ip address 196.1.1.26 255.255.255.0
ip directed-broadcast
encapsulation ppp
no ip route-cache
dialer idle-timeout 90
dialer map ip 196.1.1.29 name r3 8358664
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 0835866101
isdn spid2 0835866301
ppp authentication chap
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
r2#sh isdn status
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 96, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
TEI = 97, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
Spid Status:
TEI 96, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 1, tid = 1
TEI 97, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 3, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
r3 config:
!
interface BRI0
ip address 196.1.1.29 255.255.255.0
ip directed-broadcast
encapsulation ppp
no ip route-cache
logging event subif-link-status
dialer idle-timeout 90
dialer map ip 196.1.1.26 name r2 8358661
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 0835866201
isdn spid2 0835866401
no fair-queue
ppp authentication chap
!
ip classless
ip route 164.56.2.132 255.255.255.252 192.168.4.1
no ip http server
!
access-list 99 permit 192.57.1.1
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
r3#sh isdn status
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 94, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
TEI = 95, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
Spid Status:
TEI 94, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 1
TEI 95, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 4, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
r2#sh dialer map
Static dialer map ip 196.1.1.29 name r3 (8358662) on BRI0
r3#sh dialer map
Static dialer map ip 196.1.1.26 name r2 (8358661) on BRI0
r2#sh debug
Dial on demand:
Dial on demand events debugging is on
Generic IP:
IP packet debugging is on
PPP:
PPP packet display debugging is on
ISDN:
ISDN events debugging is on
ISDN Q931 packets debugging is on
ISDN events debug DSLs. (On/Off/No DSL:1/0/-)
DSL 0 --> 1
1 -
ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-)
DSL 0 --> 1
1 -
r2# ping 196.1.1.29
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 196.1.1.29, timeout is 2 seconds:
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: BRI0 DDR: Dialing cause ip (s=196.1.1.26, d=196.1.1.29)
1d18h: BRI0 DDR: Attempting to dial 8358662
1d18h: ISDN BR0: Outgoing call id = 0x800A, dsl 0
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led
1d18h: ISDN BR0: Event: Call to 8358662 at 64 Kb/s
1d18h: ISDN BR0: process_bri_call(): call id 0x800A, called_number 8358662,
spee
d 64, call type DATA
1d18h: CC_CHAN_GetIdleChanbri: dsl 0
1d18h: Found idle channel B1
1d18h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0A
1d18h: Bearer Capability i = 0x8890
1d18h: Channel ID i = 0x83
1d18h: Called Party Number i = 0x80, '8358662'
1d18h: Sending Complete
1d18h: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8A
1d18h: Channel ID i = 0x89
1d18h: Locking Shift to Codeset 5
1d18h: Codeset 5 IE 0x2A i = 0x809402, '`=', 0x8307, '8358662',
0x8E0B2
0, 'TELTONE', 0x20, '2', 0x20
1d18h.: ISDN BR0: received HOST_PROCEEDING call_id 0x800A
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
Success rate is 0 percent (0/5)
r2#
1d18h: BRI0: wait for isdn carrier timeout, call id=0x800A
1d18h: ISDN BR0: Event: Hangup call to call id 0x800A ces = 1
1d18h: ISDN BR0: process_disconnect(): call id 0x800A, call type is DATA,
b_idb
0x2617CEC, ces 1
1d18h: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x0A
1d18h: Cause i = 0x8090 - Normal call clearing
1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x8A
1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x0A
1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x800A
1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
r3 debug...
1d18h: ISDN BR0: RX <- SETUP pd = 8 callref = 0x34
1d18h: Bearer Capability i = 0x8890
1d18h: Channel ID i = 0x89
1d18h: Signal i = 0x40 - Alerting on - pattern 0
1d18h: ENDPOINT IDent i = 0x8281
1d18h: Calling Party Number i = 'A', 0x81, '8358661'
1d18h: Called Party Number i = 0xC1, '8358662'
1d18h: ISDN BR0: Incoming call id = 0x10, dsl 0
1d18h: ISDN BR0: received HOST_INCOMING_CALL call_id 0x10
1d18h: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE
1d18h: ISDN BR0: Event: Received a DATA call from 8358661 on B1 at 64 Kb/s
1d18h: ISDN BR0: RM returned call_type 0 resource type 0
1d18h: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0xB4
1d18h: Channel ID i = 0x89
1d18h: ISDN BR0: isdn_send_connect(): msg 4, call id 0x10, ces 1 bchan 0,
call t
ype DATA
1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
1d18h: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x10
1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x34
1d18h: Cause i = 0x8290 - Normal call clearing
1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB4
1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x10
1d18h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 ,
call la
sted 30 seconds
1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3