From: mbeck_mbeck@xxxxxxxxxxx
Date: Wed Jan 31 2001 - 12:06:21 GMT-3
Hi People,
Please respond to me directly as well, as I cant
receive the list from where i am.
I configured 3 routers connected to a ls1010, R1 is
the hub, R2/R3 spokes. This all worked fine.
So I added a cat5000 with lane card and associated pvc
onto the ls1010 / R1. Of course we are receiving
bridged data so we need irb. Set this up and R1 can
connect to sc0 on the cat, but not my other routers.
Anyone managed to get IRB working with atm?
Cheers,
Mark
r1#term len 0
r1#sho run
Building configuration...
Current configuration : 1342 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r1
!
logging rate-limit console 10 except errors
enable password cisco
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
bridge irb
!
!
!
interface Ethernet0
ip address 172.16.11.1 255.255.255.0
media-type 10BaseT
!
interface Ethernet1
no ip address
shutdown
media-type 10BaseT
!
interface ATM0
no ip address
map-group mark
pvc 0/100
protocol ip 172.16.110.4 broadcast
broadcast
encapsulation aal5snap
!
!
svc nsap 47.00918100000000100739F401.333333333333.00
protocol ip 172.16.110.3 broadcast
broadcast
!
atm pvc 5 0 5 qsaal
atm pvc 16 0 16 ilmi
atm esi-address 111111111111.00
no atm ilmi-keepalive
bridge-group 1
!
interface FastEthernet0
no ip address
shutdown
half-duplex
!
interface BVI1
ip address 172.16.110.1 255.255.255.0
!
router eigrp 10
network 172.16.0.0
no auto-summary
no eigrp log-neighbor-changes
!
ip classless
no ip http server
!
!
map-list mark
ip 172.16.110.2 atm-nsap
47.00918100000000100739F401.222222222222.00 broadcast
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
exec-timeout 0 0
password cisco
login
!
end
r1#show atm map
Map list ATM0pvc1 : PERMANENT
ip 172.16.110.4 maps to VC 1, VPI 0, VCI 100, ATM0
, broadcast
Map list ATM0svc1 : PERMANENT
ip 172.16.110.3 maps to NSAP
47.00918100000000100739F401.333333333333.00
, broadcast
Map list mark : PERMANENT
ip 172.16.110.2 maps to NSAP
47.00918100000000100739F401.222222222222.00
, broadcast, connection up, VC 2, VPI 0, VCI
32, ATM0
r1#deb ip pac
IP packet debugging is on
r1#ping 172.16.110.
00:07:22: IP: s=172.16.110.1 (local), d=224.0.0.10
(BVI1), len 60, sending broad
/multicast2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.110.2,
timeout is 2 seconds:
00:07:25: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, sending
00:07:25: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, encapsulat
ion failed.
00:07:26: IP: s=172.16.110.1 (local), d=224.0.0.10
(BVI1), len 60, sending broad
/multicast
00:07:27: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, sending
00:07:27: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, encapsulat
ion failed.
00:07:29: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, sending
00:07:29: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, encapsulat
ion failed.
00:07:31: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, sending
00:07:31: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, encapsulat
ion failed
00:07:31: IP: s=172.16.110.1 (local), d=224.0.0.10
(BVI1), len 60, sending broad
/multicast.
00:07:33: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, sending
00:07:33: IP: s=172.16.110.1 (local), d=172.16.110.2
(BVI1), len 100, encapsulat
ion failed.
Success rate is 0 percent (0/5)
r1#und all
All possible debugging has been turned off
r1#
00:07:35: IP: s=172.16.110.1 (local), d=224.0.0.10
(BVI1), len 60, sending broad
/multicast
r1#
r1#show ver
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-IS-M), Version 12.1(5)T,
RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 11-Nov-00 09:21 by ccai
Image text-base: 0x60008968, data-base: 0x60CCC000
ROM: System Bootstrap, Version 5.2(4) [kmac 4],
RELEASE SOFTWARE (fc1)
r1 uptime is 14 minutes
System returned to ROM by reload
Running default software
cisco 4500 (R4K) processor (revision B) with
32768K/4096K bytes of memory.
Processor board ID 02161087
R4600 CPU at 100Mhz, Implementation 32, Rev 2.0
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash
(Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
r1#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3