From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Wed Jan 31 2001 - 09:31:19 GMT-3
Hi All,
When using the command=20
"dialer map <protocol> <next-hop-addr> <name=3Dhostname> <BROADCAST> =
<dial-string>
I've made some weird observations. I checked CCO and it states that the =
<broadcast> option is optional(for=20
enabling IPX/RIP, IPX/SAP updates across the link) but when configuring =
2 directly connected routers in=20
an attempt to use dynamic routing(rip/igrp/eigrp) no routes were being =
learned by either device.=20
I enabled the broadcast option on one side of the ISDN connection and =
the routes were propagated. =20
However, the other side did not pass its routing information. There's =
couple of sample TAC=20
configurations that make no use if the broadcast option and routing =
works. =20
What I'm I missing...or is this a noted "feature" within the IOS...?
Nigel.
=20
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3