From: zhuqingliu (zql@xxxxxxxxxx)
Date: Wed Jan 31 2001 - 06:14:09 GMT-3
Hi, All,
The following chart is the work arround.
Join 224.1.1.1 RP
r1---------------/--r2---------------r4
F.R. /
/
/
r3
PIM sparse-mode
r1 , r2 and r3 are connected with frame-relay and r2 is the hub. no sub-inter
face is used for r2.
r1 join group 224.1.1.1
r2 is the RP and pim nbma-mode configured for r2's frame-relay interface.
The problem is that r3 can only ping 224.1.1.1 once in a while.
///////////////////////////////////////////////////////////////////////////////
/////////////////////////
r3#ping 224.1.1.1
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
Reply to request 0 from 137.20.100.33, 156 ms
r3#ping 224.1.1.1
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
.
r3#ping 224.1.1.1
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
.
r3#
///////////////////////////////////////////////////////////////////////////////
/////////////////////////
Thanks in advance.
Perry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3