From: Desyatnik, Yan (Yan.Desyatnik@xxxxxxx)
Date: Tue Jan 30 2001 - 13:52:34 GMT-3
When configure new style PVC.
Int atm 2/0
Pvc 0/1 then hit enter and it will get you into pvc mode where you can
specify encapsulation, QoS, and lots more.
Yan
-----Original Message-----
From: Horton, Jeff [mailto:jhorton@lsfi.com]
Sent: Tuesday, January 30, 2001 11:31 AM
To: 'ccielab@groupstudy.com'
Subject: Configuring ATM PVCs with UBR vs. ABR
When configuring ATM PVCs similar to the example in
Caslow's/Pavlichenko's
book,
Interface ATM 3/0
ATM PVC 1 0 99 aal5snap
IP address 1.1.1.1 255.255.255.0
Map-group mygroup
Map-list mygroup
Ip address 2.2.2.2 atm-vc 1 aal5snap
I cannot find an option for UBR, only ABR. After looking
through the
archives I see that the above is an older form of mapping a
PVC. However, I
cannot find an aal5snap option when using the newer method,
Interface ATM 3/0
IP address 1.1.1.1 255.255.255.0
Pvc-mypvc 0/1......
Is there a way of specifying UBR for the first example and
if not, is there
an option for aal5snap for the second method?
Also, any helpful links would be greatly appreciated.
Thanks,
Jeff
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:48 GMT-3