From: Maness, Drew (drew.maness@xxxxxxxxxxxx)
Date: Tue Jan 30 2001 - 13:03:31 GMT-3
You're looking for the autocommand {command}. Just place it in your Aux or
line number
autocomand telnet 200.200.200.10
You can check out for further info
http://www.cisco.com/univercd/cc/td/doc/product/software/ios102/accscg/57390
.htm#26101
Hope that helps
Drew
-----Original Message-----
From: Frank Jimenez [mailto:franjime@cisco.com]
Sent: Tuesday, January 30, 2001 7:45 AM
To: ccielab@groupstudy.com
Subject: Dial-In stumper....
OK, been messing around with this one for a while and I can't seem to get
the right perspective on it....
Is it possible to connect up a dial-in session and have the dial-in
immediately telnet to another box (say a UNIX system?)
Desired behavior:
PC-->modem-->Dial-In to 2600 with Analog modems-->Over Ethernet, upon
connect, telnet to (for example) 200.200.200.10
I feel like this should be easy, but I'm just missing something to get this
set up. Any takers?
Frank Jimenez
franjime@cisco.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:48 GMT-3