RE: ISDN Backup without the backup interface command?

From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Mon Jan 29 2001 - 06:38:37 GMT-3

• Next message: Justin Menga: "RE: Voice Dial-peer question"
• Previous message: Justin Menga: "RE: Frame Relay - Lessons Learned..."
• Maybe in reply to: Miguel A. Ciena: "ISDN Backup without the backup interface command?"
• Next in thread: Wade Edwards: "RE: ISDN Backup without the backup interface command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
OSPF Demand Circuit - be careful if the router is a redistribution point for
other protocols that include the ISDN interface in their domain due to
classful classifications still in use...

Regards,

Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz

-----Original Message-----
From: Miguel A. Ciena [mailto:mac38456@pegasus.cc.ucf.edu]
Sent: Monday, January 29, 2001 3:07 AM
To: ccielab@groupstudy.com
Subject: ISDN Backup without the backup interface command?

Between R3 and R5 I got a ISDN link. I want to configure my ISDN to =
back-up my frame relay connection between R3 and R5...Here is the Trick: =
Without using Floating Static and without using the Back-up interface =
command..My Frame and ISDN are in OSPF area 0...

any ideas..

• Next message: Justin Menga: "RE: Voice Dial-peer question"
• Previous message: Justin Menga: "RE: Frame Relay - Lessons Learned..."
• Maybe in reply to: Miguel A. Ciena: "ISDN Backup without the backup interface command?"
• Next in thread: Wade Edwards: "RE: ISDN Backup without the backup interface command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3