From: Farnoosh Bahram (farnoosh_ccie@xxxxxxxxx)
Date: Sun Jan 28 2001 - 22:45:11 GMT-3
Kyle,
VoIP over Framerelay with LLQ is supported as of
12.1(2)T IOS with PLUS features.
http://cco/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t2/dtfrp
qfq.htm
We can specify LLQ for VoIP based on UDP port range
that voip uses, 16384 to 32767.
Farnoosh
--- Kyle Galusha <kgalusha@cisco.com> wrote:
> I haven't tried it and it would use just one pvc but
> I you considered either LLQ on an ATM link or IP to
> ATM COS features. Interesting note on LLQ is that
> it supports VoIP on serial links and ATM pvcs but
> not VoIP over frame relay. Think that is an option?
> Kyle
>
> At 03:34 PM 1/28/2001 -0500, Brian Hescock wrote:
> >Ok, one possibility is to put voice and data on
> different pvc's is to use
> >subinterfaces with a different pvc on each then
> policy route it based upon
> >ip precedence. But that's ugly (it will increase
> cpu utilization in the
> >real world), there's got to be a better way. Any
> ideas?
> >
> >B.
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3