From: Bill Dellamar (wdellamar@xxxxxxxxx)
Date: Sun Jan 28 2001 - 17:35:04 GMT-3
I just did this config and it works. I haven't tried
one-way authentication with pap yet.
Bill
ROUTER 4
hostname r4
!
username remote6 password 0 r6
isdn switch-type basic-ni
!
interface Ethernet0
ip address 1.1.1.1 255.255.255.0
no ip directed-broadcast
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866101
isdn spid2 0835866301
ppp authentication pap
!
interface Dialer0
ip address 1.1.46.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer remote-name remote6
dialer string 8358662
dialer pool 1
dialer-group 1
ppp authentication pap
ppp pap sent-username remote4 password 7 083318
!
router eigrp 1
network 1.0.0.0
no auto-summary
!
ip classless
!
dialer-list 1 protocol ip permit
!
end
ROUTER 6
hostname r6
!
username remote4 password 0 r4
isdn switch-type basic-ni
!
interface TokenRing0
ip address 1.1.6.6 255.255.255.0
no ip directed-broadcast
ring-speed 16
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866201
isdn spid2 0835866401
ppp authentication pap
!
interface Dialer0
ip address 1.1.46.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer remote-name remote4
dialer string 8358661
dialer pool 1
dialer-group 1
ppp authentication pap
ppp pap sent-username remote6 password 7 095E18
!
router eigrp 1
network 1.0.0.0
no auto-summary
!
end
--- Jack Reynolds <jacreyno@cisco.com> wrote:
> Excellent. Try it with IOS other than 12.0(9) =)
>
>
------------------------------------------------------------------
> Jack Reynolds Cisco Systems 3636 Nobel
> Drive, Suite 150
> Systems Engineer II || || San Diego,
> California 92122
> jacreyno@cisco.com :||: :||: Phone:
> (858)658-7832
> www.cisco.com ..:||||:...:||||:.. Pager:
> (800)365-4578
>
------------------------------------------------------------------
>
> -----Original Message-----
> From: Brian Hescock [mailto:bhescock@cisco.com]
> Sent: Sunday, January 28, 2001 12:16 PM
> To: Jack Reynolds
> Cc: Ccielab
> Subject: Re: Follow-up - ISDN PAP
>
>
> I believe it will work with dialer profiles as well
> but there's a bug with
> it, which is why you end up having to use "ppp pap
> sent-username". But
> "sent-username" is somewhat confusing, you have to
> be careful which
> hostname you specify with which password. It's on
> my list of things to
> review again next week, I'll let you know if I get
> it working with dialer
> profiles.
>
> B.
>
> On Sun, 28 Jan 2001, Jack Reynolds wrote:
>
> > OK, I got this working, but here is what I had to
> do... Both R3 and R5
> are
> > running 12.0(9). I had to get rid of my dialer
> profiles and go BACK to
> > dialer maps on the physical bri's. This is the
> only way PAP auth would
> > work.
> >
> > Thanks for all the replies. Has anyone else see
> this problem?
> >
> > JR
> >
> >
> >
> > -----Original Message-----
> > From: Jack Reynolds [mailto:jacreyno@cisco.com]
> > Sent: Sunday, January 28, 2001 10:46 AM
> > To: Kyle Galusha; Bernard Dunn
> > Subject: RE: ISDN PAP
> >
> >
> > Tried it, but still no worky.
> >
> >
> > -----Original Message-----
> > From: Kyle Galusha [mailto:kgalusha@cisco.com]
> > Sent: Sunday, January 28, 2001 10:48 AM
> > To: Bernard Dunn; Jack Reynolds
> > Subject: RE: ISDN PAP
> >
> >
> > found it. ppp pap sent-username.
> > Thanks,
> > Kyle
> >
> > At 05:15 AM 1/29/2001 +1100, Bernard Dunn wrote:
> > >
> > >
> > >int dialer0
> > >
> > >ppp sent-username xxx password yyy
> > >ppp authen pap
> > >
> > >
> > >On Sun, 28 Jan 2001, Jack Reynolds wrote:
> > >
> > >> Hi,
> > >>
> > >> I am using dialer interfaces with ppp auth
> pap (this command also
> > appears on
> > >> bri physical)
> > >>
> > >> I made sure that each router had a username
> for the other router's
> > dialer
> > >> remote-name. Both passwords set to cisco.
> > >>
> > >>
> > >> When I do Chap on this, it works fine.
> Hmmm....
> > >>
> > >> R5 (calling router)
> > >>
> > >> username R3 password 0 cisco
> > >>
> > >> interface BRI0
> > >> no ip address
> > >> no ip directed-broadcast
> > >> encapsulation ppp
> > >> dialer pool-member 1
> > >> isdn switch-type basic-ni
> > >> isdn spid1 0835866201 8358662
> > >> isdn spid2 0835866401 8358664
> > >> ppp authentication chap
> > >> !
> > >> interface Dialer0
> > >> ip address 137.10.254.2 255.255.255.252
> > >> no ip directed-broadcast
> > >> encapsulation ppp
> > >> ip ospf interface-retry 0
> > >> ip ospf demand-circuit
> > >> dialer remote-name R3
> > >> dialer idle-timeout 60
> > >> dialer string 8358661
> > >> dialer pool 1
> > >> dialer-group 1
> > >> ppp authentication chap
> > >>
> > >> dialer-list 1 protocol ip permit
> > >>
> > >>
> > >>
> > >> R3 (called router)
> > >>
> > >> username R5 password 0 cisco
> > >>
> > >> interface BRI0
> > >> no ip address
> > >> no ip directed-broadcast
> > >> encapsulation ppp
> > >> dialer pool-member 1
> > >> isdn switch-type basic-ni
> > >> isdn spid1 0835866101 8358661
> > >> isdn spid2 0835866301 8358663
> > >> ppp authentication chap
> > >> !
> > >> interface Dialer0
> > >> ip address 137.10.254.1 255.255.255.252
> > >> no ip directed-broadcast
> > >> ip pim sparse-mode
> > >> encapsulation ppp
> > >> ip ospf interface-retry 0
> > >> ip ospf demand-circuit
> > >> dialer remote-name R5
> > >> dialer idle-timeout 60
> > >> dialer pool 1
> > >> dialer-group 1
> > >> ppp authentication chap
> > >>
> > >> dialer-list 1 protocol ip permit
> > >>
> > >> Now I substitute CHAP for PAP, and here is
> the debug ppp packet on
> R5:
> > >>
> > >> 13:54:45: BR0:1 LCP: AuthProto PAP
> (0x0304C023)
> > >> 13:54:45: BR0:1 LCP: MagicNumber
> 0x0CF7A525 (0x05060CF7A525)
> > >> 13:54:45: BR0:1 PPP: I pkt type 0xC021,
> datagramsize 12
> > >> 13:54:45: BR0:1 LCP: O CONFNAK [REQsent] id
> 54 len 9
> > >> 13:54:45: BR0:1 LCP: AuthProto CHAP
> (0x0305C22305)
> > >> 13:54:45: BR0:1 LCP: I CONFREJ [REQsent] id
> 48 len 8
> > >> 13:54:45: BR0:1 LCP: AuthProto PAP
> (0x0304C023)
> > >> 13:54:45: BR0:1 LCP: O CONFREQ [REQsent] id
> 49 len 14
> > >> 13:54
> > >> :45: BR0:1 PPP: I pkt type 0xC021,
> datagramsize 18
> > >> 13:54:45: BR0:1 LCP: AuthProto PAP
> (0x0304C023)
> > >> 13:54:45: BR0:1 LCP: MagicNumber
> 0x03088F46 (0x050603088F46)
> > >> 13:54:45: BR0:1 LCP: I CONFREQ [REQsent] id
> 55 len 14
> > >> 13:54:45: BR0:1 LCP: AuthProto PAP
> (0x0304C023)
> > >> 13:54:45: BR0:1 LCP: MagicNumber
> 0x0CF7A525 (0x05060CF7A525)
> > >> 13:54:45: BR0:1 PPP: I pkt type 0xC021,
> datagramsize 12
> > >> 13:54:45: BR0:1 LCP: O CONFNAK [REQsent] id
> 55 len 9
> > >> 13:54:45: BR0:1 LCP: AuthProto CHAP
> (0x0305C22305)
> > >>
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3