From: Bernard Dunn (dunn@xxxxxxxxx)
Date: Sun Jan 28 2001 - 08:26:00 GMT-3
All,
Here's a simple way to test dlsw functionality. Have just made a quick'n
dirty setup, just on token ring routers. We use this type of thing to test
dlsw in our lab also. All up you'll need 4 routers.
You can play around with defining multiple PUs, different lsap/ssap,
etcc.. The end result is to be able to bring up multiple circuits, check
reachability cache, test your filtering..
Topology:
dspu host -- ( ) -- r1 ---z___ r2 -- ( ) -- dspu pu
Key points
==========
dspu host - router pretends to be FEP/host side
dspu pu - router pretends to be client/end station/PU2.x
r1 & r2 - routers configured for dlsw
What happens is that dspu host is configured to accept traffic from a
particular client/PU. The dspu pu downstream router is defined, uses
and sends out an xid, so will try and start a dlsw circuit.
In real environments, a real SNA host sits behind the dspu host.
Configurations
==============
(dspu host)
dspu host is defined to recognise the dspu pu:
<snip>
dspu pu TOK1 rmac 4000.1010.0001 rsap 4 lsap 4
interface TokenRing0
mac-address 4000.3745.0001
no ip directed-broadcast
ring-speed 16
dspu enable-pu lsap 4
dspu start TOK1
</snip>
Verify the results:
ad-c2513-2-2#sh dspu pu TOK1
dspu pu TOK1 TokenRing0 PU STATUS Active
RMAC 4000.1010.0001 RSAP 4 LSAP 4
XID 01010101 RETRIES 4 RETRY_TIMEOUT 30
WINDOW 7 MAXIFRAME 1472
ACT BUFFERS 0 SAP ACT BUFFERS 0
FRAMES RECEIVED 1 FRAMES SENT 1
LUs USED BY DSPU 0 LUs ACTIVE 0
LUs USED BY API 0 LUs ACTIVE 0
LUs ACTIVATED BY HOST BUT NOT USED 0
-------------------------------
(r1)
source-bridge ring-group 505
dlsw local-peer peer-id 150.100.20.1
dlsw remote-peer 0 tcp 64.10.1.1
!
interface Loopback0
ip address 150.100.20.1 255.255.255.0
!
interface TokenRing0
ip address 150.100.17.1 255.255.255.0
ring-speed 16
source-bridge 301 4 505
Verify the results:
ad-c2504-2-4#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
TCP 64.10.1.1 CONNECT 105 102 conf 0 1 0
00:46:43
Total number of connected peers: 1
Total number of connections: 1
ad-c2504-2-4#sh dlsw cir detail
Index local addr(lsap) remote addr(dsap) state
uptime
1040187392 4000.3745.0001(04) 4000.1010.0001(04) CONNECTED
00:30:29
PCEP: 1470A0 UCEP: 5952D0
Port:To0 peer 64.10.1.1(2065)
Flow-Control-Tx CW:20, Permitted:39; Rx CW:20,
Granted:19; Op: Repeat
Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
RIF = 0630.1F94.12D0
Bytes: 18/229 Info-frames: 1/1
XID-frames: 2/4 UInfo-frames: 0/0
Total number of circuits connected: 1
ad-c2504-2-4#sh dlsw reach
DLSw Local MAC address reachability cache list
Mac Addr status Loc. port rif
4000.3745.0001 FOUND LOCAL TokenRing0 0630.1F94.12D0
DLSw Remote MAC address reachability cache list
Mac Addr status Loc. peer
4000.1010.0001 FOUND REMOTE 64.10.1.1(2065)
DLSw Local NetBIOS Name reachability cache list
NetBIOS Name status Loc. port rif
DLSw Remote NetBIOS Name reachability cache list
NetBIOS Name status Loc. peer
-------------------------------
(r2)
!
source-bridge ring-group 505
dlsw local-peer peer-id 64.10.1.1
dlsw remote-peer 0 tcp 150.100.20.1
!
!
interface TokenRing0/0
mtu 4464
ip address 64.10.1.1 255.255.0.0
ipx network 123
ring-speed 16
source-bridge 80 2 505
Verify the results:
ad-c3620-2-9#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
TCP 150.100.20.1 CONNECT 98 101 conf 0 1 0
00:44:54
Total number of connected peers: 1
Total number of connections: 1
ad-c3620-2-9#sh dlsw cir det
Index local addr(lsap) remote addr(dsap) state
uptime
1056964608 4000.1010.0001(04) 4000.3745.0001(04) CONNECTED
00:29:31
PCEP: 62CB6F24 UCEP: 62CF5B4C
Port:To0/0 peer 150.100.20.1(2065)
Flow-Control-Tx CW:20, Permitted:19; Rx CW:20,
Granted:39; Op: Repeat
Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
RIF = 06B0.0502.1F90
Bytes: 229/18 Info-frames: 1/1
XID-frames: 4/2 UInfo-frames: 0/0
Total number of circuits connected: 1
ad-c3620-2-9#sh dlsw reach
DLSw Local MAC address reachability cache list
Mac Addr status Loc. port rif
4000.1010.0001 FOUND LOCAL TokenRing0/0 06B0.0502.1F90
DLSw Remote MAC address reachability cache list
Mac Addr status Loc. peer
4000.3745.0001 FOUND REMOTE 150.100.20.1(2065) max-lf(4472)
DLSw Local NetBIOS Name reachability cache list
NetBIOS Name status Loc. port rif
DLSw Remote NetBIOS Name reachability cache list
NetBIOS Name status Loc. peer
-------------------------------
(dspu pu)
Here you define who you'll try and contact by MAC address
dspu host TOK2 xid-snd 01010101 rmac 4000.3745.0001 rsap 4 lsap 4
!
interface TokenRing0
mac-address 4000.1010.0001
ring-speed 16
dspu enable-host lsap 4
dspu start TOK2
!
Verify the results:
ad-c2504-2-3#sh dspu pu TOK2
dspu host TOK2 TokenRing0 PU STATUS Active
RMAC 4000.3745.0001 RSAP 4 LSAP 4
XID 01010101 RETRIES 255 RETRY_TIMEOUT 30
WINDOW 7 MAXIFRAME 1472
ACT BUFFERS 0 SAP ACT BUFFERS 0
FRAMES RECEIVED 1 FRAMES SENT 1
LUs USED BY DSPU 0 LUs ACTIVE 0
LUs USED BY API 0 LUs ACTIVE 0
LUs ACTIVATED BY HOST BUT NOT USED 0
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:45 GMT-3