From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Sat Jan 27 2001 - 19:14:57 GMT-3
means ipx sap-incremental eigrp 1 ...If you add rsup-only , that sends ONLY
the SAP updates and routing info is suppressed ...
Just my 2c ..
Cheers,Padhu
-----Original Message-----
From: Wayne Hu
To: Robert DeVito; ccielab@groupstudy.com
Sent: 1/27/01 4:01 PM
Subject: RE: IPX Question
ipx sap-incremental eigrp 1 rsup-only
To take advantage of Enhanced IGRP's incremental SAP update mechanism
while
using the RIP routing protocol instead of the
Enhanced IGRP routing protocol, specify the rsup-only keyword. SAP
updates
are then sent only when changes occur, and
only changes are sent. Use this feature only when you want to use RIP
routing; Cisco IOS software disables the exchange of
route information via Enhanced IGRP for that interface.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Robert DeVito
Sent: Saturday, January 27, 2001 5:11 PM
To: ccielab@groupstudy.com
Subject: IPX Question
I came across a scenario that specified to reconfigure the IPX network
such
that only changes in RIP and SAP causes updates to be generated. The
IPX
network that they are referring to is a VLAN (ethernet) with 3 routers.
I
know about EIGRP incremental updates on the ehternet interfaces, but
that
does not control RIP and SAP updates, does it?
Thank you,
Robert
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:45 GMT-3