From: Andrew (arousch@xxxxxxxx)
Date: Wed Jan 24 2001 - 16:40:23 GMT-3
You should erase the image that's on the flash and load another
image. Also, try another flash chip.
At 02:14 PM 1/24/01 -0500, Vigna, Dave wrote:
>I got another DRAM chip (16 MB) and put it in. It Boots the same but
>recognizes the change in memory. Then it stops. I can jump into ROM mode
>and change the boot config. I tried the setting for diagnostics messages.
>They pass with OKs then it dumps me to ROM mode. I then tried the setting
>that dumps me to ROM if FLASH fails five times in a row. This dumped me to
>ROM mode. What its looking like is the Flash chip is bad. I have a couple
>more 2500s that I am going to try swapping the flash chips with unless you
>have other recommendations.
>
>I can't do this till after 5pm EST so it may be awhile before my next reply.
>But I do appreciate the interest.
>
>Thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3