From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Wed Jan 24 2001 - 10:18:00 GMT-3
Justin,
My configs match those in the url, which includes items 1 and 2 below.
Brian
On Wed, 24 Jan 2001, Justin Menga wrote:
> Should work, it is very simple:
>
> 1. Dial peer must request RSVP using 'req-qos ....' command
> 2. Each interface (ingress and egress) to the session target MUST request
> RSVP using 'ip rsvp bandwidth x x' command
>
> Regards,
>
> Justin Menga CCIE #6640 MCSE+I CCSE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
>
> -----Original Message-----
> From: Brian Hescock [mailto:bhescock@cisco.com]
> Sent: Wednesday, 24 January 2001 3:21 p.m.
> To: ccielab@groupstudy.com
> Subject: problems with RSVP for VOIP
>
>
> Have any of you tried RSVP with VOIP as shown in the sample config at
> the following url:
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/voice
> _c/vcprt1/vcvoip.htm
>
> I can't seem to get it to work (no reservations). I noticed the sample
> config was missing "ip rsvp sender" and "ip rsvp reserv" but it still
> didn't work after adding those commands also. Any ideas? My config is
> identical to the example.
>
> Brian
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3