From: Rex Dayes (rex@xxxxxxxxx)
Date: Wed Jan 24 2001 - 02:05:57 GMT-3
----- Original Message -----
From: <r.r.freeman@att.net>
To: "Rex Dayes" <rex@dayes.com>
Cc: <pkowalsky@evolvesoft.com>
Sent: Tuesday, January 23, 2001 6:25 PM
Subject: Re: Fw: Anyone taken the Cisco GSR course? Looking for a good
training partner recommendation...
> I am one of 3 instructors that are qualified to teach
> the Cisco GSR class. The class is a 2.5 day class at the
> Parkmore training facility in San Jose California. The
> class teaches the architecture of the router. How a
> packet travels through the cards and the crossbar
> switching fabric. The class also concentrates a chapter
> on CEF (Cisco Express Forwarding) and how it works in
> the GSR, as well as a chapter on COS (Class of Service),
> the tools to manage end to end COS and how you configure
> them. We don't go into the different transports with
> which the GSR can interface except for DPT (Dynamic
> Packet Transport). DPT is a Cisco propriatary transport
> (RFC submitted to the standards committee March 1 2000)
> designed primarily for metro area network deployment. It
> runs on two counter rotating rings at speeds of OC12 or
> OC48. The class is fairly intense and hands on lab time
> is equal to lecture time. If you have several students
> you would like to attend the class and you have GSR
> equipment, a private class can be arranged. You can
> register for the class at www.ani-training.com.
> --
> Freeman & Associates
> Phone 602 321 4780
> Fax 602 388 2453
> r.r.freeman@worldnet.att.net
>
>
> >
> > ----- Original Message -----
> > From: "Carlton L. Frye, Jr." <clfrye@bellatlantic.net>
> > To: "Pete Kowalsky" <pkowalsky@evolvesoft.com>; <ccielab@groupstudy.com>
> > Sent: Tuesday, January 23, 2001 4:10 PM
> > Subject: RE: Anyone taken the Cisco GSR course? Looking for a good
training
> > partner recommendation...
> >
> >
> > > I talked to a Cisco engineer who took the course. He said it primarily
> > went
> > > over the hardware
> > > of the box, the backplane, etc.. Other than the hardware and it's OC-3
and
> > > above interfaces
> > > it doesn't differ much from any other IOS router.
> > >
> > > Carlton
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Pete Kowalsky
> > > Sent: Tuesday, January 23, 2001 5:21 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Anyone taken the Cisco GSR course? Looking for a good
training
> > > partner recommendation...
> > >
> > >
> > > All,
> > >
> > > I'm looking to take the GSR class that Cisco offers out in their
San
> > > Jose lab. NO, not for my CCIE lab -- there's no GSR stuff on there, I
> > > know... ;-) Has anyone taken this GSR class, and could you tell me
how
> > it
> > > was? I need a recommendation for a quality training partner that
offers
> > > this course. Also, does anyone know if there's a training partner on
the
> > > East Coast that offers this hands-on GSR class? (I live in the
Washington
> > > D.C. area, and would like to minimize travel if possible.)
> > >
> > > Thanks!
> > > Pete Kowalsky
> > >
> > > Network Engineer
> > > The Allied Group, Inc.
> > > Reston, VA
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3