From: Elver Sena (cled@xxxxxxx)
Date: Tue Jan 23 2001 - 14:45:47 GMT-3
Question??? Is ISL trunking platform (Cisco) independent? Can ISL be done
on the 1700 with a fe and IOS plus?
----- Original Message -----
From: "Jim Hall" <jihall@cisco.com>
To: "Chuck Church" <cchurch@MAGNACOM.com>; "'Nickel, Shawn'"
<Shawn.Nickel@getronics.com>; <ccielab@groupstudy.com>
Sent: Tuesday, January 23, 2001 10:57 AM
Subject: RE: Help with isl trunking on a 2620
'Plus' image & a minimum of FastEthernet...
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Chuck Church
> Sent: Tuesday, January 23, 2001 8:31 AM
> To: 'Nickel, Shawn'; 'ccielab@groupstudy.com'
> Subject: RE: Help with isl trunking on a 2620
>
>
> Make sure you have a 'Plus' feature set.
>
> Chuck
>
> -----Original Message-----
> From: Nickel, Shawn [mailto:Shawn.Nickel@getronics.com]
> Sent: Tuesday, January 23, 2001 10:21 AM
> To: 'ccielab@groupstudy.com'
> Subject: Help with isl trunking on a 2620
>
>
> I have a question concerning isl trunking on the 2620. I tried to type
> "encapsulation isl" on fastethernet 0/0.1. I get the old "% Invalid input
> detected at '^' marker." When I try to type in the ip address for the
> subinterface I get the following error message "Configuring IP
> routing on a
> LAN subinterface is only allowed if that subinterface is already
> configured
> as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN." My IOS version is
> 12.0(3)T3, which as far as I can tell from Cisco's website, does support
> trunking.
>
> Any thoughts/suggestions.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:41 GMT-3