From: Andrew G. Mason (andrew@xxxxxxxxxxxxx)
Date: Tue Jan 23 2001 - 12:55:07 GMT-3
Hi,
I have a 2620 and I have just done this OK with IOS 12.09. Is the int Fa0/0
shutdown?
Here is the config.
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router10
!
!
ip subnet-zero
!
ip audit notify log
ip audit po max-events 100
!
voice-port 1/0/0
!
voice-port 1/0/1
!
process-max-time 200
!
interface FastEthernet0/0
no ip address
no ip directed-broadcast
!
interface FastEthernet0/0.1
encapsulation isl 1
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface FastEthernet0/0.2
encapsulation isl 2
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface FastEthernet0/0.3
encapsulation isl 3
ip address 192.168.2.1 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface BRI0/0
no ip address
no ip directed-broadcast
shutdown
isdn guard-timer 0 on-expiry accept
!
interface Serial0/0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
!
ip classless
no ip http server
!
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
!
!
no scheduler allocate
end
Hope this helps.
Andrew..
>===== Original Message From "Thounda Craig, Jr." <tcraig@network-data.com>
=====
>You need a 3600 or higher unless Cisco recently changed their code for
>2600's.
>(won't work).
>
>brgds,
>Thounda
>
> -----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Nickel, Shawn
>Sent: Tuesday, January 23, 2001 10:21 AM
>To: 'ccielab@groupstudy.com'
>Subject: Help with isl trunking on a 2620
>
>I have a question concerning isl trunking on the 2620. I tried to type
>"encapsulation isl" on fastethernet 0/0.1. I get the old "% Invalid input
>detected at '^' marker." When I try to type in the ip address for the
>subinterface I get the following error message "Configuring IP routing on a
>LAN subinterface is only allowed if that subinterface is already configured
>as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN." My IOS version is
>12.0(3)T3, which as far as I can tell from Cisco's website, does support
>trunking.
>
>Any thoughts/suggestions.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3