From: Rick Burts (burts@xxxxxxxxxxxxxx)
Date: Tue Jan 23 2001 - 11:41:47 GMT-3
Philip
I think saying the virtual ring should never appear on Ethernet
routers doing DLSw is a bit strong. The source-bridge ring-group
command is required for token ring operation with DLSw and not
required for Ethernet. My Ethernet DLSw configs work just fine
without the source-bridge ring-group. I find that many people
make a common practice of including the virtual ring on any DLSw
config. It does no harm and may give you desirable flexibility
for altering configs at some time in the future as requirements
change.
Rick
Rick Burts, CCSI CCIE 4615 burts@mentortech.com
Mentor Technologies 240-568-6500 ext 6652
133 National Business Parkway 240-568-6515 fax
Annapolis Junction, Md 20701
Chesapeake Network Solutions has now become Mentor Technologies.
Mentor Technologies is a certified Cisco Training Partner and also
a Cisco Professional Services partner.
We offer most of the Cisco training courses.
We also offer training in Checkpoint Firewall software and
Fore Systems (now Marconi) and MicroMuse.
We also provide network consulting services including
design, management, and problem solving.
We have 24 CCIEs on our staff.
On Sat, 20 Jan 2001, Virnoche, Phil wrote:
>
>
>
> Good morning All-
>
> I am scratching my head on this one,........ I did the DLSW+ config part of
> the lab, and as I always do my first swing thru the lab, I parse through the
> provided configs to see how "close" I am .....
>
> Well in the router 4 config there is this statement that I can't find any
> documentation to support: source-bridge ring-group 10
> From my findings this should never appear on the ehternet end of a DLSW+
> configuration. Am I missing something?
>
> BTW- I looked through the FAQ's and didn't see this mentioned.
>
> Danka.
>
>
> Philip G. Virnoche CCNA
> Network Engineer - AT&T Wireless
> phone: 425.580.5239
> cell: 206.601.3134
>
> "HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
> pig."
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3