From: Hebert, Cory J (cory.hebert@xxxxxxxx) ((cory.hebert@xxxxxxxx))
Date: Fri Jan 19 2001 - 15:38:06 GMT-3
Hi all...
I set up a test lab for DLSW where I had 2 dlsw peers (each with an ethernet
segment and one host), and
had everything working fine. I could log on to either PC, do a 'find', and
locate the other PC with no problems.
I then started experimenting with various forms of filtering, and finally
played around with the 'icanreach' command.
What I did was log on to my local router, look at the arp cache, and noted
the mac address of my PC that showed up
in the arp cache. I then used that address on my local router in the
'icanreach' command, in conjunction with
the 'mac-exclusive' command, and now neither PC can see the other.
Since both PC's are attached to ethernet segments, I figured I wouldn't have
to translate to non-canonical form,
but I did it any to experiment, and still no luck. Keep in mind there are
no other filters of any kind, anywhere.
Am I missing something here?
Thanks in advance,
Cory
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:36 GMT-3