From: R. Benjamin Kessler (ben@xxxxxxxxxxxxxxxxxxxxx)
Date: Fri Jan 19 2001 - 14:27:55 GMT-3
Hi all,
Just a quick question about OSPF demand circuits. I've setup a sub-lab to
test OSPF demand circuits; I've used the doc CD as a reference and have
things working nicely - BRI only dials when a topo change occurs, etc.
The main difference between the CD and the R5/R6 configs for Lab8a is that
in the lab only R6 is configured to dial R5; on the CD both routers dial
both ways.
I modified my lab to emulate that of Lab8 - e.g. two routers connected via
e-net link as primary with BRI as backup and removed the phone number from
R5 so it only accepts calls.
This seems to work also, albeit a bit slower - waiting for the dead interval
and all...my question is as follows:
OSPF topo changes will cause the BRI to dial even if the main interface is
up - if my understanding of OSPF is accurate, I would believe this to be the
desired behavior.
I guess I'm a bit confused by the statement in the lab that "The ISDN
connection should only come up if the ethernet connection is broken;" Given
the above logic, this statement doesn't seem too accurate.
Any insight here?
Thanks,
Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:35 GMT-3