From: Carlos Patriawan (carlos@xxxxxxxxxx)
Date: Thu Jan 18 2001 - 01:05:37 GMT-3
dont forget
aaa new-model
line vty 0 4
transport input telnet ssh
----- Original Message -----
From: "Aamir Waheed" <awaheed@cisco.com>
To: "Sam Munzani" <sam@munzani.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, January 17, 2001 3:11 PM
Subject: Re: SSH on CISCO 2600
> Hi Sam,
>
> I think trying out a 3 des image within the T-train would be a good
> option, i have seen problems with some of the IOS's you talked about,
> Moreover SSH in Version 1 depends on the IOS that you are using. If you
are
> using a DES IOS, then you are only going to get 56bit encryption, if you
> are using a 3DES image, then you could get either 56bit or 168bit
> encryption.
>
> Hope this helps,
> Regards,
> Aamir
>
>
> Sam Munzani wrote:
>
> > Hi Group,
> >
> > CCO Documents says that SSH is there on 2600 series platform and thay =
> > even have configuration guide for SSH. I was unable to get those "ip =
> > ssh" commands on 2611 with following IOS.
> >
> > 12.1.5 ENTERPRISE/FW/IPSEC 56 and 12.1.5T ENTERPRISE/FW/IPSEC 56=20
> >
> > Any input on this?
> >
> > Sam
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3