From: Ronnie Royston (RonnieR@xxxxxxxxxxxxxxxxx)
Date: Wed Jan 17 2001 - 20:20:20 GMT-3
I want to run classical IP over ATM with R1 acting as ARP server and R2 as
ARP client. I want to configure the ESI only on R1 and have him get his
NSAP from R2. Is this possible (running 2 MC3810s)?
I have:
R1------ATM CLOUD------R2
R1:
interface ATM0
ip address 1.1.1.1 255.0.0.0
atm esi-address 00410B0A1081.00
no atm ilmi-keepalive
atm arp-server self
pvc 0/16 ilmi
!
pvc 0/5 qsaal
!
!
R2:
interface ATM0
ip address 1.1.1.2 255.0.0.0
atm nsap-address AB.CDEF01234567890ABCDEF012.345678901234.12
no atm ilmi-keepalive
atm arp-server nsap AB.CDEF01234567890ABCDEF012.00410B0A1081.00
pvc 0/16 ilmi
!
pvc 0/5 qsaal
!
The first problem I need to resolve is how to have R1 get his complete NSAP
from R2. See R1's 'sho int atm 0' below:
3810a#sho int atm 0
ATM0 is up, line protocol is up
Hardware is PQUICC Atom1
Internet address is 1.1.1.1/8
MTU 1500 bytes, sub MTU 1500, BW 1536 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
NSAP address: 00.000000000000000000000000.00410B0A1081.00
Encapsulation ATM, loopback not set
Keepalive not supported
Encapsulation(s):, PVC mode
512 maximum active VCs, 10 current VCCs
VC idle disconnect time: 300 seconds
Signalling vc = 3, vpi = 0, vci = 5
UNI Version = 4.0, Link Side = user
Last input 00:00:07, output never, output hang never
Last clearing of "show interface" counters never
Anybody able to help me? Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3